Recommended Trailer Wiring Harness for a 2007 Toyota Camry XLE

Question

Question:

Hi again, Is there a wiring harness you recommend that I can use when I install my hitch? I prefer not to run a wire to the battery. This is for a 2007 Toyota Camry XLE 6 cylinder. Thanks

asked by: Robert

0

Expert Reply:

Hey Robert, yes there is. For your 2007 Toyota Camry XLE I recommend going with the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55567. This wiring harness is going to plug into your existing harness not requiring you to splice into anything. You are going to have to run the hot lead to your battery though, but that goes for any of the wiring harnesses for your Camry.

expert reply by: Bryce D

0

John H.

12/15/2025

Hey Robert, how did things go with the Curt wiring harness for your Camry? Did running the hot lead to the battery end up being easier than expected? Your update could make it easier for the next person wiring their hitch.

Robert

12/15/2025

Hi John, I’m sorry to report that running a wire through the firewall was just too difficult. Plus having to remove the backseats it just was too much trouble. I do appreciate the follow up. Robert

Kate F.

12/16/2025

@Robert I hear you, Robert. I’ve installed quite a few harnesses myself, and it can definitely feel daunting the first time. If you’d prefer to have someone handle the wiring for you, I’ve attached our Dealer Locator so you can find an installer in your area. Not sure how bad you need the wiring, so I thought I would suggest this option for you. I hope you have a wonderful Holiday Season filled with your most favorite people =)

Helpful Links

installer/near-me/o-fallon-mo/towing-accessories

Answer 1

Hello Harold, thanks for reaching out. I drive a 2006 Corolla so it is cool to see those older Toyotas still on the road. They don't make 'em like the used to lol. Anyway, we actually do have one hitch that is confirmed to fit the dual…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Recommended Trailer Wiring Harness for a 2007 Toyota Camry XLE

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching