Replacement for Dexter Hub 8-248
Updated 12/22/2025 | Published 10/25/2024
Question:
I need a complete wheel hub assembly for my utility trailer. Original hub is Dexter 8-248, other markings include MGI 319. 5 on 4.5 13 inch tire. Bolts not studs. What do you recommend?
asked by: Dwight
0
Dexter 8-248
(click to enlarge)
(click to enlarge)
Expert Reply:
Hello Dwight; the Dexter 8-248 is a standard 3,500 lb axle hub. For a Dexter replacement you can use the # 84545BX you were looking at. This has a 5 on 4-1/2 bolt pattern, 1/2" wheel bolts, and is compatible with 13" wheels.
expert reply by:
Robin H
0
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Bearing Kit Recommendation for Dexter 8-248 Hub
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: bearing assembly
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: Replacement Dexter Trailer Hub with 8-248 Marking
- Q&A: Proper Mounting Location for Side Marker Lights on a Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Video: How to Choose a Trailer Brake Controller
Explore Expert Info
![Our Expert]()
on Trailer Hubs and Drums
on Trailer Hubs and Drums
Robin H.
12/22/2025
Hey Dwight, how did the Dexter hub assembly work out for your utility trailer? It sounds like it should have matched your 3,500‑lb axle setup. Your feedback could help others looking for the same replacement.