Recommended Front and Rear Tie Downs for a 2021 Chevy Silverado 1500 w/ a 5-3/4' Bed

Question

Question:

Hello, The page says I Will get both the front and rear tie downs, but the video says the rear are sold separately. For $850 am i getting front and rear, or just the front? Thanks! I have a 2021 Chevy Silverado 1500, 5.7 bed, single exhaust with no step under the bed. Best Pat

asked by: Pat G

0

Expert Reply:

Hey Pat! You will get both front and rear tie downs when you purchase the TorkLift Tie Downs item # TL79VV. The item # TL79VV gives you the following parts:

TorkLift Camper Tie-Downs - Front - item # TLC2224

TorkLift Camper Tie-Downs - Rear - item # TLC322

expert reply by: Jerred H

0

Jerred H.

12/22/2025

Hey Pat, how did things turn out with the TorkLift tie downs for your Silverado? Did getting both the front and rear pieces work out as expected? Your update could make it easier for others checking on the same package.

Answer 1

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Chevrolet Silverado 1500 with Dual Exhaust is part #TLC2224 for the front and part #TL54FR for the rear. If you don't already have turnbuckles, I recommend the TorkLift Locking…

view full answer...

Answer 2

Yes I confirmed with TorkLift that those were the correct fitting tie-downs for your 2020 GMC Sierra 1500 with 6.5' bed without board underneath bed and factory installed hitch with dual exhausts. So you'll need the TorkLift Custom…

view full answer...

Answer 3

Hello Sheri, thanks for reaching out. The TorkLift Tie Downs #TL79VV will fit the 2025 GMC Sierra 1500, as long as your factory running boards are cab length only. If they extend beyond the cab to the wheel, they will obstruct the tie downs, but as…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Recommended Front and Rear Tie Downs for a 2021 Chevy Silverado 1500 w/ a 5-3/4' Bed

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching