Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Great Prices for the best truck camper tie downs from TorkLift. TorkLift Camper Tie-Downs - Custom Frame Mount - Front part number TLC2224 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
All Info
Reviews (2404)
Q & A (0)
Related Parts
Photos
TorkLift Truck Camper Tie Downs
- TLC2224
Highlights
Custom Fit for Your Vehicle: Mounts to existing attachment points
Stable, Safer Ride: Frame-mounted design spreads camper weight evenly and lowers center of gravity for better handling.
Damage-Free Install: Bolts to existing frame holes with little to no drilling or truck modification needed.
Clean Look When Unloaded: Removable arms keep brackets nearly invisible when not hauling your camper.
Built to Last: Black powder coated steel resists rust and corrosion over years of rough travel.
Secure Connection Options: Two anchor holes let you fine-tune turnbuckle angle for a tight, stable hold.
Features to know about
Stable Camper Handling: True Frame-Mounted Design
These tie-downs bolt directly to your truck’s frame, which is the most solid mounting point you can use. By securing the camper at the frame instead of the bed or bumper, the load’s weight gets spread evenly and its center of gravity stays low. That means less sway in crosswinds and smoother handling on long drives. The result is a steady, secure ride that feels natural whether you’re cruising highways or taking rough roads.
Install Without Drilling: Custom-Fit Tie-Downs
Each tie-down is custom-designed to bolt into existing holes in your frame, so there’s little to no drilling and no modification required. The brackets mount tight against the frame for a clean fit and minimal loss of ground clearance. It’s a straightforward install that can be done with basic tools, leaving your truck’s structure fully intact and ready for the road.
Strong Build That Lasts: Powder-Coated Steel
The tie-downs are made from durable black powder-coated steel that resists corrosion and holds up through weather, salt, and road grime. The heavy-duty finish protects against rust while keeping the hardware looking sharp after seasons of use. It’s the kind of toughness you want when you’re logging thousands of miles with your camper attached.
Clean Look When Unloaded: Removable Arms
When the camper comes off, you can remove the tie-down arms from their brackets so only low-profile mounts remain under the frame. That keeps your truck looking clean when it’s not hauling and prevents snagging on obstacles or curbs. You’ll hardly know they’re there until it’s time to load up again.
Adjustable Connection for a Secure Hold
Each arm includes two pin holes so you can extend them to clear fenders or bowed sidewalls and get the best anchor angle for your camper. This flexibility makes it easy to line up turnbuckles (sold separately) for a snug fit that keeps everything locked down tight without rubbing or shifting on the road.
Specs
Construction
Material: Black powder coated steel
Mounting: Mounts tight to vehicle frame with minimal loss of ground clearance
Installation: Uses pre-existing holes in the frame - little to no drilling required
Country of Origin: Made in the USA
Fit and Compatibility
Mount Type: Custom frame mount
Vehicle Position: Front
Fit Type: Custom fit for specific vehicle models
Pairs With: Rear tie-downs (sold separately)
Functionality
Attachment Points: Creates attachment points for securing camper to truck bed
Required Components: Requires turnbuckles (sold separately) to attach camper to tie-downs
Connection Adjustment: Adjusts for simple, secure connection to camper with 2 anchor holes for best angle
Arm Features: Removable arms; extend out from truck body to clear bowed sidewalls and fenders
Stability: Ensures excellent handling by distributing camper's weight evenly and lowering its center of gravity
Aerodynamics and Safety: Avoids a top-heavy setup that would be vulnerable to strong winds and sway
Appearance: Remains virtually invisible beneath vehicle when arms are removed
Warranty
Warranty: Lifetime warranty
C2224 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
This Product Fits The Following Vehicles
2019 - 2026 GMC Sierra 1500 5-3/4 Foot Bed - no running boards or cab length only boards - factory hitch
2019 - 2026 GMC Sierra 1500 5-3/4 Foot Bed - no running boards or cab length only boards - no hitch
2019 - 2026 GMC Sierra 1500 5-3/4 Foot Bed - no running boards or cab length only boards - non-TorkLift aftermarket hitch
2021 - 2026 GMC Sierra 1500 5-3/4 Foot Bed - no running boards or cab length only boards - Torklift SuperHitch Hero 15K
2019 - 2026 GMC Sierra 1500 6-1/2 Foot Bed - no running boards or cab length only boards - factory hitch
2019 - 2026 GMC Sierra 1500 6-1/2 Foot Bed - no running boards or cab length only boards - no hitch
2019 - 2026 GMC Sierra 1500 6-1/2 Foot Bed - no running boards or cab length only boards - non-TorkLift aftermarket hitch
2021 - 2026 GMC Sierra 1500 6-1/2 Foot Bed - no running boards or cab length only boards - Torklift SuperHitch Hero 15K
2022 - 2022 GMC Sierra 1500 Limited 5-3/4 Foot Bed - no running boards or cab length only boards - factory hitch
2022 - 2022 GMC Sierra 1500 Limited 5-3/4 Foot Bed - no running boards or cab length only boards - no hitch
2022 - 2022 GMC Sierra 1500 Limited 5-3/4 Foot Bed - no running boards or cab length only boards - non-TorkLift aftermarket hitch
2022 - 2022 GMC Sierra 1500 Limited 5-3/4 Foot Bed - no running boards or cab length only boards - Torklift SuperHitch Hero 15K
2022 - 2022 GMC Sierra 1500 Limited 6-1/2 Foot Bed - no running boards or cab length only boards - factory hitch
2022 - 2022 GMC Sierra 1500 Limited 6-1/2 Foot Bed - no running boards or cab length only boards - no hitch
2022 - 2022 GMC Sierra 1500 Limited 6-1/2 Foot Bed - no running boards or cab length only boards - non-TorkLift aftermarket hitch
2022 - 2022 GMC Sierra 1500 Limited 6-1/2 Foot Bed - no running boards or cab length only boards - Torklift SuperHitch Hero 15K
2019 - 2026 Chevrolet Silverado 1500 5-3/4 Foot Bed - no running boards or cab length only boards - factory hitch
2019 - 2026 Chevrolet Silverado 1500 5-3/4 Foot Bed - no running boards or cab length only boards - no hitch
2019 - 2026 Chevrolet Silverado 1500 5-3/4 Foot Bed - no running boards or cab length only boards - non-TorkLift aftermarket hitch
2021 - 2026 Chevrolet Silverado 1500 5-3/4 Foot Bed - no running boards or cab length only boards - Torklift SuperHitch Hero 15K
2019 - 2026 Chevrolet Silverado 1500 6-1/2 Foot Bed - no running boards or cab length only boards - factory hitch
2019 - 2026 Chevrolet Silverado 1500 6-1/2 Foot Bed - no running boards or cab length only boards - no hitch
2019 - 2026 Chevrolet Silverado 1500 6-1/2 Foot Bed - no running boards or cab length only boards - non-TorkLift aftermarket hitch
2021 - 2026 Chevrolet Silverado 1500 6-1/2 Foot Bed - no running boards or cab length only boards - Torklift SuperHitch Hero 15K
2022 - 2022 Chevrolet Silverado 1500 LTD 5-3/4 Foot Bed - no running boards or cab length only boards - factory hitch
2022 - 2022 Chevrolet Silverado 1500 LTD 5-3/4 Foot Bed - no running boards or cab length only boards - no hitch
2022 - 2022 Chevrolet Silverado 1500 LTD 5-3/4 Foot Bed - no running boards or cab length only boards - non-TorkLift aftermarket hitch
2022 - 2022 Chevrolet Silverado 1500 LTD 5-3/4 Foot Bed - no running boards or cab length only boards - Torklift SuperHitch Hero 15K
2022 - 2022 Chevrolet Silverado 1500 LTD 6-1/2 Foot Bed - no running boards or cab length only boards - factory hitch
2022 - 2022 Chevrolet Silverado 1500 LTD 6-1/2 Foot Bed - no running boards or cab length only boards - no hitch
2022 - 2022 Chevrolet Silverado 1500 LTD 6-1/2 Foot Bed - no running boards or cab length only boards - non-TorkLift aftermarket hitch
2022 - 2022 Chevrolet Silverado 1500 LTD 6-1/2 Foot Bed - no running boards or cab length only boards - Torklift SuperHitch Hero 15K
WARNING: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Customers Who Purchased This Truck Camper Tie Downs Also Bought...
The hardest part of the installation was removing the frame bolts from the truck that are reused. The instructions were clear and easy to follow, and each piece fit perfectly where it was supposed to go. You don't need to be a mechanic to get these installed, but the proper tools are a must, along with a good chunk of an afternoon. 1742124
by:
George
12/17/2020
2020
GMC
Sierra 1500
Very easy to install. I did have to slide the side step forward 1 1/2 inch but no big deal
I was able to get the back bolt tight but there is no way to get a wrench or ratchet in there with the tank right near the bracket. By putting a socket on that bolt head, I could hold a finger against the socket and get enough friction to get the nut tightening. Once the bolt had more friction on it, the nut tightened fully.
Good heavy product and very good instructions. 924408
by:
Wayne
06/07/2022
2022
Chevrolet
Silverado 1500 LTD
All parts arrived in good condition. The Torklift part you recommended was the exact fit, installation went well. 1309813
by:
Kevin
11/12/2020
Installed them on my GMC AT4 this afternoon. 3-hour job for me. But I’m an idiot. Great product, great suppor. etrailer is the best! PS they’re not paying me. I just prefer great customer service. etrailer delivers. 911447
by:
Raymond
05/12/2021
Directions were clear and complete. Booklet was very easy to understand, good pics. Brackets are built to last. 1035570
by:
BArt
07/16/2023
2023
GMC
Sierra 1500
I was told I would have to remove my running boards. Was not difficult to modify. This should be an option. 1624855
by:
Ben M
08/22/2020
Easy installation and rugged durability.866601
by:
Craig
01/22/2022
worked as they should....1250827
by:
John
09/19/2022
Installed and everything fitted as per instruction. Thank you 1414869
by:
Pat
06/06/2021
Works great1057036
by:
Jacques
07/26/2021
good product good service1104928
by:
Doug
09/09/2023
I heard it was very hard to install. I found it very easy. 1664112
Hello Dave,
I also need to know what size your bed is, what engine you have (gas or diesel) and if those running boards go under the truck bed or stop before the truck bed (cab length only). view full answer...
Hey Pat! You will get both front and rear tie downs when you purchase the TorkLift Tie Downs item # TL79VV. The item # TL79VV gives you the following parts:
TorkLift Camper Tie-Downs - Front - item # TLC2224
TorkLift Camper Tie-Downs - Rear - item # TLC322 view full answer...
Hi Carl,
There are camper tie-downs for your 2024 Chevy Silverado 1500, but the ones you asked about are not a fit; I checked with the manufacturer to verify this for you. Finding the right fit for your truck is going to depend on a number of factors - the bed size, if you have running boards/nerf bars that go underneath the bed or are just cab length, and the exact hitch you have.
For example, if your 2024 Chevy Silverado 1500 had a 6-1/2' bed, no running boards under the bed, and a... view full answer...
Hello Johnnu,
I checked directly with TorkLift for you and the C2217 are not a fit for the 2020 Chevy Silverado 1500. The truck underwent a generation change in 2019, so the fits for aftermarket products also changed in that time, which is why they aren't compatible with the '20 Silverado.
You were correct about the part number for the front tie-downs for your short bed 2020 Chevy Silverado 1500 are the TorkLift Camper Tie-Downs - Custom Frame Mount - Front # TLC2224. view full answer...
Hey Philip, we have the Torklift camper tie downs that fit your 2024 Chevy Silverado 1500 6-1/2 foot bed with a factory hitch with the part # TLC2224 for the front and part # TLF54FR for the rear if you have dual exhaust or the part # TLC3220 if you have single exhaust. view full answer...
For your 2021 Chevrolet Silverado 1500 with 5-3/4 foot or 6-1/2 foot bed, with or with out running boards, and with or without factory hitch, the TorkLift # TLC2224 FRONT tie-downs are a confirmed fit. For REAR tie-downs use TorkLift # TL54FR since you have dual exhaust.
If you don't already have turn buckles, the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK are what I recommend. view full answer...
The Front # TLC2224 and Rear # TL54FR TorkLift tie-downs that fit your 2021 Chevrolet Silverado 1500 have a shipping weight of 62 lbs so you'll be looking at about 57 lbs for the tie-downs. The weight of the turnbuckles can vary but if you were going with something like part # TLS9529-2-LK which is stainless steel then you're looking at another 17-ish lbs which brings you up to about 74 lbs for everything (give or take a few pounds).
Currently (as of October 2021) there are no aluminum... view full answer...
The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Chevrolet Silverado 1500 with Dual Exhaust is part # TLC2224 for the front and part # TL54FR for the rear. If you don't already have turnbuckles, I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9529-2-LK. view full answer...
Yes I confirmed with TorkLift that those were the correct fitting tie-downs for your 2020 GMC Sierra 1500 with 6.5' bed without board underneath bed and factory installed hitch with dual exhausts. So you'll need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2224 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TL54FR.
For middle priced turnbuckles I recommend the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020. These stainless... view full answer...
For Torklift camper tie downs for your 2021 GMC Sierra 1500 with running boards and dual exhaust you'd want the part # TLC2224 for the front and part # TL54FR for the rear. This fits with dual exhaust as well. view full answer...
The TorkLift Camper Tie-Downs Front # TLC2224 and Rear # TLC3220 are what you will need for your 2024 GMC Sierra 1500 Denali short bed diesel.
I recommend using the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK to secure your slide in camper to the tie-downs. These are stainless steel to resist corrosion from the elements and include locks. view full answer...
The correct front Torklift tie down for your 2020 Chevy Silverado short bed with dual exhaust is the part numbers # TLC2224 and # TL54FR. The other rear kit part # TLC3220 is for single exhaust models of the truck instead. view full answer...
The rear Torklift camper tie down part # TLC3220 that you referenced does fit versions of your truck that have the factory hitch so yes you'd need this and then for the front # TLC2224 and the turnbuckles part # TLS9522-2-LK would work great. view full answer...
When installing tie downs on your 2022 Chevrolet 1500 LTD 5-3/4 foot bed with factory hitch, The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2224 and The TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TL54FR are the correct tie downs for your vehicle.
The tie downs will provide attachment points at the front and rear of your truck. The frame mounted design ensures excellent handling. The tie downs have a powder coated steel construction.
I attached a couple... view full answer...
If your Sierra has running boards that run the full length of the CAB ONLY but there are not running boards or steps under the 6-1/2 foot bed (and with factory hitch) then the perfect choice is the TorkLift # TLC2224 (front) and # TL54FR (rear) frame mounted camper tie-downs.
If you also need turnbuckles, the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK are what I recommend.
If you have running boards or steps under your bed please contact me again for a revised recommendation. view full answer...
Since your 2021 Chevrolet Silverado 1500 has single exhaust, the correct rear camper tie-downs are the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC3220.
The correct front tie-downs would be the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2224.
You will also need turnbuckles to attach the camper to the tie-downs.
- TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs # TLS9529-2-LK view full answer...
I was able to locate the correct TorkLift front camper tie downs on TorkLifts website. According to TorkLifts fit guide the correct TorkLift Front camper tie downs for your 2019 Chevrolet Silverado 1500 with double cab, single exhaust, running boards that end at the cab and 6.5' bed are the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2224. view full answer...
For your 2021 Chevrolet Silverado 1500 with the single side exhaust, factory trailer hitch receiver and no running boards under the truck bed. You will need the Front TorkLift Tie-Downs # TLC2224 and Rear TorkLift Tie-Downs # TLC3220.
I do recommend using the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK to secure your slide in camper to your Silverado. These have a durable stainless steel construction that will ensure a long life and prevent corrosion. view full answer...
The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Chevrolet Silverado 1500 Crew Cab or Double Cab is part # TLC2224 for the front and part # TL54FR for the rear if you have dual exhaust or part # TLC3220 if you have single exhaust. If you also need turnbuckles, the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK are what I recommend. view full answer...
The correct front tie-downs for your 2021 GMC Sierra 1500 are the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2224.
The correct rear tie-downs depends on if your have dual exhaust or single exhaust. I have listed each option below.
Dual-Exhaust
- TorkLift Custom Frame-Mounted Camper Tie-Downs # TL54FR
Single-Exhaust
- TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC3220
You will also need turnbuckles to secure the camper to the tie-downs.
- TorkLift Locking FastGun Turnbuckles... view full answer...
Since your running boards extend under the bed there unfortunately is not a confirmed fit available. If you wanted to remove the running boards and switch to a step that ends before the bed then you could use the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2224 and Rear # TL54FR.
To complete the setup you would also need some turnbuckles like the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020. view full answer...
We do have a solution for your needed parts however, I inquired about individual parts purchase for the TorkLift Custom Frame-Mounted Camper Tie-Downs # TL54FR & # TLC2224 and these are only sold in kit form. So while we can supply you what you need, there will be spare parts. view full answer...
The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 GMC Sierra 1500 5-3/4' Bed will be part # TLC2224 for the front and part # TL54FR for the rear if you have dual exhaust or part # TLC3220 if you have a single exhaust. view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.