Replacement Leaf Springs Needed For A 2006 Trailex Car Trailer Model CT 7541
Updated 10/25/2024 | Published 10/02/2024 >
Products Featured in This Question
Question:
I have a 2006 Trailex car trailer, model CT 7541, with 3500 lb axles and I need to replace the leaf springs. Would a pair of these 2800 lb leaf springs work.. 2x2800=5600…? If not, do you have a pair of 20.5 inch leaf springs that will? Thanks
asked by: Jim B
Expert Reply:
Hey Jim,
Leaf spring ratings are listed as the axle's capacity which would mean that a pair of the # DX73CR would be rated for 2,800lbs. A single # DX73CR would only be rated for 1,400lbs. Since you have 3,500lb axles you'll need to make sure you go with ones listed for 3,500lb axles.
To get an accurate measurement of the leaf spring's length you'll need to first lift the trailer by the frame on the side you're measuring to take the weight off of the leaf spring. You'll then measure from the center of one eyelet to the center of the other eyelet.
The closest option we currently offer in the 3,500lb capacity range is 23-1/8" # e59SR so I would doublecheck that length to see if maybe it would be a fit. If not let me know what measurement you get and I'll see if I can get that specific length and capacity added.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 2,800-lb Trailer Axles - 20-1/2" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 2800 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 20-1/2 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Shop: 4-Leaf Double-Eye Spring for 2,800-lb Trailer Axles - 20-1/2" Long
- Search Results: trailer leaf springs
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Video: Hands-On with the MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers
- Search Results: moryde 4000
- Search Results: dexter spring bushing
- Search Results: suspension equalizer
- Search Results: k7129100
- Video: Dexter E-Z Flex Suspension Kit Spec Review
- Video: Review of RV Ride Control Trailer Suspension Parts - Alignment and Lift Kits - RR23QX
- Video: Feature Review 4-Leaf Double-Eye Spring for 2,800-lb Trailer Axles
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Search Results: suspension kits
- Search Results: cross
- Shop: E-Z Flex Equalizers - Double-Eye Springs - Tandem Axle - 8,000 lbs - Qty 2
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Q&A: MORyde Cushioned Equalizer that Fits 2017 Jayco Jayflight 212QB
- Q&A: Does It Matter If Blue or Yellow Road Armor Equalizers Are Used?
- Video: Comprehensive Review: Dexter E-Z Flex Suspension Kit
- Video: All You Need to Know About the MORryde Rubber Suspension Upgrade for Triple Axle Trailers
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR29ZR
- Q&A: Solution to Prevent 2023 KZ Travel Trailer From Bottoming Out
- Q&A: What Causes Trailer Leaf Springs To Break Continuously
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Suspension Enhancement
- Q&A: Can The Optronics ThinLine LED Trailer Tail Light # STL87RCB Be Used As A Normal Tail Light
- Q&A: How To Wire the Optronics ThinLine LED Trailer Tail Light As A Marker Light


Jim B.
10/2/2024
Thanks for your reply, Kevin. The springs I need are 20 1/2 inches eye to eye, For a 3500 LB axle. A total of four springs. If you could look around for some, I would greatly appreciate it. Jim