Search: suspension kits   >  

Yes, we do have a triple axle Roadmaster Comfort Ride kit for 8k axles with the part #RM-2460-2580-3 which is for 3 inch diameter axles. Since you have 7k Dexter axles that would mean you have 3 inch diameter axles. This would make a huge…

I spoke to my contact at Roadmaster and they informed me that you should use the 5,000 Lb Rated Roadmaster Comfort Ride Leaf Spring Suspension Kit part #RM-2460-2560 with 5,200 lb axles. I asked about using the 7,000 Lb Rated Roadmaster Comfort…

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is…

Hi Tom; do you know what wheelbase you have? Or the dimensions of your equalizer? That would be needed in order to get you the right upgrade without affecting your ride height.

The MORryde X-Factor Crossmember #MR33WR is compatible with the Equa-Flex #LC279687 so you will be able to use both on your trailer. You can stick with MORryde for the wet bolt kit and get their Suspension Upgrade Kit for Tandem Axle Trailers. You…

The use of a properly rated and installed weight distribution system will not require the use of additional suspension enhancements such as the Timbren Rear Suspension Enhancements. However, as your 2017 Ram 1500 has coil springs on the rear of the…

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…

Since both the 7k Roadmaster Comfort Ride system #RM-2460-2570 and the 8k version part #RM-2460-2580 are designed for 3 inch axles you can use either and in your case the 8k version would be perfectly compatible and give you a little more suspension…

Based on your images it does appear your trailer was built to have double eye springs rather than a slipper spring. For this you will need to measure your current mounts from bolt hole center to bolt hole center. We have the 3,500LB leaf springs…

I would be happy to compare the Road Armor, Dexter E-Z Flex, and MORryde equalizers you were looking at for your Jayco Eagle 325BHS. First things first each of these kits are designed to replace equalizers that measures roughly 6" between the…

Trailer manufacturers don't usually keep a record of parts like these that they install at the factory, so I cannot be sure as to the exact length of the shackle strap that would have come originally on your trailer. With this in mind, a 3-1/8…

Your trailer height might be increased a little bit but the difference in dimensions for your Equa-Flex Cushioned Equalizers #LC279687 to the Road Armor Shock Absorbing Equalizer Kit #LC696740 isn't significant enough for it to really make a huge…