Result: suspension equalizer

Hey Joe, welcome back! With a 35" wheelbase the MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR is the correct fit. I verified your Reflection has 6k axles on the Grand Design parts site so the #APUBR-8 is also correct and so is…

Hey Curt! I wouldn't get too caught up in the axle spacing for the E-Z Flex Equalizers #K71-655-00. The best thing you can do is measure your existing equalizer. If your measurement from left to right bolt hole on center is 7-3/4" then this…

It sounds like you are definitely on the right track here. The #MR79ZR is indeed the correct suspension upgrade kit for your 2007 Colorado 5th wheel with LRE suspension. Moryde makes a fantastic suspension upgrade kit. The heavy duty shackles and wet…

Curt has a brake controller install harness that fits your 2023 Jeep Grand Cherokee L with the part #C51446 which you could use with a Curt brake controller like the Triflex part #C51140. To find the connector in your vehicle you'll need to drop…

Hey Mark. There is not a bushing on the hangers used on slipper spring trailers like item #e33SR. Smaller single axle trailers will have a bolt that runs through the hanger, some larger and tandem axle trailers will have a welded tube that the spring…

Hi Travis; those look pretty flat so I don't think 26" would do it either. The 25-1/4" long #EM86RB you ordered will be a better fit. Completely flat these would have a similar measurement at just over 26" which is in line with…

The standard size of eye bolt for a trailer is 9/16". This is only 1/16" of an larger than what you said you have, 1/2" so there could be an error in measuring or this could also be a very oddball application. That said, if the leaf…

Hello Dave, thanks for reaching out. It is possible to replace a 6,000 lb leaf spring with a 7,000 lb spring, as long as the eye-to-eye length is the same. It will not necessarily increase the carrying capacity of your trailer, since the axles are…

Hey Mike, since your wheelbase is 33 inches the correct MORryde Alltrek is the part #MR89DR. The distance between the bolt holes left to right is 6-1/2 inches which is close enough to what you have and the vertical dimension is 4-1/2 inches which is…

The Kodiak Oil Cap #KPCAP you are looking at is a replacement cap for the Kodiak Pro Lube Kit. The oil cap you need is the Redline Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles #RG04-230. This will replace the oil cap on your trailer axles…

In regards to trailer suspension, it's always best to swap parts with identical replacements when doing any work so you don't run into issues like you're having now with components binding or making contact. That said, I do understand…

Hey David, thanks for reaching out! To replace the leaf spring that fits with your 5,200 lb Lippert axle you likely need the 26" Long 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e94SR, but you'll need to measure from center-eye to…