Self-Adjusting Electric Brakes For 2022 Grand Design Momentum 350G With 7k Axles
Updated 01/27/2026 | Published 08/20/2024
Products Featured in This Question
Question:
We have a 2022 Grand design Momentum 350G, build date of July 2021, 7,000 axles with self adjusting brakes. It has 8 bolt wheels and 17.5 wheels. The online listings dont seem to address these. Can you suggest brakes with anti-rust hardware/backing plates. Thanks
asked by: Don S
Expert Reply:
Hey Don,
The 17-1/2" wheel listing is just a guideline for hub size, because wheels that are too big have a hard time mounting to some hubs due to the lack of surface area. So it won't affect the fit of brakes, and because you have the 7k Dexter hub and drum on your 2022 Grand Design Momentum 350G, here's what you'll need:
- Electric Trailer Brakes - Self-Adjusting # AKEBRK-7-SA
- Mounting Bolts and Hardware # BRKH12
These brakes have an E-coating on the backing plates, and the hardware is zinc-coated so you won't face issues with rust.
Product Page this Question was Asked From
Mounting Bolts and Hardware for 12" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- ABS Fasteners
more information >
Continue Researching
- Search Results: disc brake kits
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: disc brakes
- Search Results: trailer brakes
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 12-1/4" - Left/Right Hand - 7.2K
- Search Results: oil bath cap
- Shop: Valcrum Threaded Aluminum Oil Bath or Grease Cap for Lippert 10K to 16K Axles - Black
- Shop: Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi
- Shop: Replacement Oil Cap for Kodiak 10,000-lb Disc Brake Kits
- Shop: Dexter BrakeRite Electric Over Hydraulic Actuator for Disc Brakes - Vented - 1,500 psi
- Shop: Oil Cap Kit - 21-40
- Q&A: Are Oil bath Hubs a Better Option for My 7,000 Lbs Axles Than Using Grease Hubs
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Q&A: Are The Electric Trailer Brake Assemblies AKEBRK-7R-SA Available Individually?
- Q&A: Does Dexter Make A Complete Shackle And Wet Bolt Kit With 3-1/8" Long Shackles?
- Q&A: How Many of the Dexter Heavy Duty Suspension Upgrade Kit K71-358-00 for a Tandem Axle Trailer
- Q&A: Grease Seals for a Dexter 7,000 lb. Axle
- Q&A: Replacement Brakes and Hubs For Axle-Tek 12-GG Axle
- Q&A: Dexter vs. etrailer 7,000 lb Electric Trailer Brakes
- Search Results: axle grease seals
- Search Results: trailer suspension parts
- Search Results: k71~652~00
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
on Accessories and Parts
Katrina D.
1/27/2026
Hey Don, how did the self-adjusting brakes and hardware work out on your Momentum 350G? Those E-coated backing plates and zinc hardware should hold up well against rust. Your update could make it easier for others with the same setup.