Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Will, I'm happy to say the answer is yes, the 3,500 lb DeeMaxx Disc Brake Kit #DE66YR is a fit for the #84 E-Z Lube Spindle #TRU74FR. The DeeMaxx hubs fit the spindle, and the grease cap on them has a rubber plug that you remove to…
view full answer...Hey Cheryl, so we have the exact replacement for your High Pointe built in microwave with the part #HP59ZR. If you were wanting the easiest solution this would be it. If you were wanting to try something different the Furrion part #FMSN09BL with…
view full answer...Thanks for reaching out, Sam! The Kodiak Disc Brakes #KOD59FR with the Dacromet/KodaGuard are definitely a solid choice, but the hub-rotors and brackets only have a 300- to 400-hour salt spray rating and the calipers have a 500- to 600-hour salt…
view full answer...Yes, you can use the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs item #23-180-181 on your 5,200 lbs axle so long as you have a 5 bolt flange like the one linked in the diagram below. These brakes fit a…
view full answer...First you will need to pull one of your hubs to verify the spindle size you have on your 1989 Spartan boat trailer. It likely has 3,500lb axles based on the weight of your 1993 BayLiner 2609 Rendezvous. To verify you will need a Digital Caliper…
view full answer...Normally we use channel locks for spindle nuts. But the Nev-R-Lube hubs are a different animal. You will need a 1-7/16 inch 6 or 12 point socket for a Nev-R-Lube nut #6-183. When you are ready to reinstall it you will need a torque wrench capable of…
view full answer...Jim yes, the Kodiak Disc Brake Caliper #KDBC225DAC will be a good replacement for your TDE 46304 calipers. These calipers are going to work with 10" or 12" rotors ,and 3,500 lbs - 6,000 lbs axles.
view full answer...Hey Brandon, Based on the information you've provided I recommend the DeeMaxx Disc Brake Kit #DE66YR. This disc brake kit has a corrosion-resistant "Maxx" coating finish on the hub/rotors, calipers, and brackets for a salt spray rating…
view full answer...To get the Dexter Zinc-Plated, Leverlock Coupler #T4845000 in a higher weight rating you'll need to bump up to a hydraulic actuator like what we see with part #DX89FR which has a 7.5K weight rating. For an alternative standard coupler solution I…
view full answer...I can certainty provide you with the information you need to select these parts yourself but as far as giving you a list of parts, that's not going to happen unfortunately as there are no resources available to look this stuff up. That said, to…
view full answer...The DeeMaxx Disc Brake Kit #DE28YR does not have the E-Z grease fitting, you'd want to take a look at the Kodiak Disc Brakes #KOD69FR instead. This brake assembly is the same thing as #DE28YR but also includes 2 hub-rotor assemblies with…
view full answer...Hey Albert, the correct replacement lithium compatible converter for the part #PD9245C is the part #PD69RR which has same amperage output of 45 amps at the correct voltage for lithium batteries.
view full answer...Filter Your Search
Contact and Help