Replacement Suspension Components For A 2019 Jayco Jay Feather X23E

Question

Question:

Hello, I have a 2019 jayco jay feather x23e. I need an axle. I have the Tag information off of the axle. Could you tell me which one I need as the rear axle is flat Thank you

asked by: Jonathan G

0

Expert Reply:

Hey Jonathan,

I think you might have part names mixed up a bit. The axle is the metal tube that the hubs/wheels mount to. Are you referring to the leaf springs, which are the attachment point between the axle and frame of the trailer? If you want to send me some pictures and the axle tag information that you have I'd be happy to help.

expert reply by: Kevin C

0

Axle Build Sheet
(click to enlarge)

Jonathan G.

7/31/2024

Hello Kevin, yes I know what an axle is. The axles on a travel trailer are bowed upward in the middle. My rear axle is not bowed anymore, it is flat. This has changed the rear tire camber angle, causing the rear tires on the trailer to wear badly on the inside. Dexter#6578112 serial#134152305

Kevin C.

8/2/2024

@JonathanG My bad, I answer a lot of questions where people mix up leaf springs and axles so I always want to confirm that we're both talking about the same part. With the Dexter part # and Serial # I was able to look up the build sheet, which I've snipped and attached a photo of above, so you can see the dimensions and other components that were used in conjunction with your axle. It looks like we don't stock your specific axle but if you call in to our customer service department @ 1-800-940-8924 with the build sheet attached above they'll be able to order an exact replacement for you. Axle Capacity: 3,500lbs Spring Center: 68.5" Hub Face: 86"

Answer 1

From our experiences the Harbor Freight trailers like yours have a hub bore that requires a cap or Bearing Buddy that measures 2.047 inches like the #BB2047 you referenced. We don't have a standard cap that fits this size so the Bearing Buddy is…

view full answer...

Answer 2

I would be happy to help you find an axle for the trailer you are building. I have 2 options for you. The first is the Dexter Trailer Axle w/ Electric Brakes item #8327816-EB. This trailer axle measures 86-1/2" from hub face to hub face,…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Replacement Suspension Components For A 2019 Jayco Jay Feather X23E

Product Page this Question was Asked From

Continue Researching