How To Determine if the Circuit Board or Keypad on a MaxxAir Fan Needs Replaced
Updated 02/03/2026 | Published 07/18/2024 >
Products Featured in This Question
Question:
Max air fan exhaust and fresh air in. How do you determine if it’s a circuit board or the keypad?
asked by: Dorman K
Expert Reply:
Honestly Dorman, most shops would have the replacement parts on hand and start by testing for power going to the fan and then jumping power to the fan motor to verify the motor is good. Then they would start by swapping out the keypad and then circuit board with one they already have. Another option is if you have a wireless remote as if the fan still operates off the remote then you know the keypad is bad.
The next option is going to be testing the different parts using a Multimeter # PT89ZR to verify if the control pad is sending power when the different buttons are used through the wiring.
If you can tell me which model fan you have I can verify the correct replacement parts for your fan.
Product Page this Question was Asked From
Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan
- Accessories and Parts
- RV Vents and Fans
- Roof Vent
- Circuit Board
- MAXXAIR
more information >
Continue Researching
- Shop: Replacement Keypad for MaxxFan Deluxe Roof Vent
- Shop: Replacement Keypad for MaxxFan Deluxe Roof Vent
- Shop: Replacement Wall Control Panel for MaxxAir MaxxFan Plus Roof Vent
- Shop: Replacement Keypad with Blank Label for MAXXAIR MaxxFan Plus Roof Vent
- Shop: Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan
- Shop: Replacement Control Plate for MaxxFan Roof Vent
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Does etrailer Carry Furrion Chill Cube w/ Heat Pump to Replace Dometic Duo-Therm
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Shop: Base Plate for Tow Bar
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer lights
- Search Results: trailer leaf springs


Jesse M.
2/3/2026
Hey Dorman, what did you find when you tested your MaxxAir fan with the multimeter and remote? Once you narrowed it down to the keypad or circuit board, it would be great to hear which part solved the issue. Your update could make it easier for others troubleshooting the same fan.