Where is Progressive Dynamics Converter Made

Question

Question:

Looking at a Progressive Dynamics PD9280AV. Is this USA made or China and can you tell me what the warranty is. Thank you

asked by: Mark D

0

Expert Reply:

Hey Mark, the Progressive Dynamics Converter part # PD9280A that you referenced is made in the USA and has a two year warranty.

expert reply by: Jameson C

0

Jameson C.

2/17/2026

Hey Mark, did the info about the Progressive Dynamics converter help you move forward with your choice? Knowing what you decided could help others wondering about the same model.

Answer 1

Hi Ron, Yes, you most likely have a 8 gauge wire which is rated for up to 40 amps so you'd need to go 6 gauge wire. The rating is per hour so two 100 amp hour batteries in parallel would be 200 amp hours divided by 35 or 45, depending on the size…

view full answer...

Answer 2

Hi Angelo; the PowerMax AC to DC Converter #PM94VR is more of a budget option but it doesn't mean it won't work well for your application. PowerMax converters are well made and ETL rated. You’ll just need to manually set the output voltage…

view full answer...

Answer 3

We have larger cargo boxes like the Thule Force XXL part #TH6359B which has 21 cubic feet of storage space, but this box and the other similar do not have the ability to open from the rear. They need to open from the side. If you could live with 18…

view full answer...

Answer 4

Hello Eric, I am glad you wrote in! The Replacement Remote for Progressive Dynamics PD1600 Series Inverters #PD46MR does not include the cable, so you will also need the Replacement 25' Cable for Progressive Dynamics PD1600 Series Inverters…

view full answer...

Answer 5

The Progressive Dynamics 2000 Watt Inverter w/ Transfer Switch #PD64FR is simply our part number for the PD1620A. We do not always use the manufacturers part numbers as our own since we have so many different manufacturers we carry.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Where is Progressive Dynamics Converter Made

Continue Researching