Is there a Baseplate for a 2020 Chevy Colorado ZR2 Bison?

Updated 05/30/2024 | Published 05/25/2024

Products Featured in This Question

etrailer XHD Non-Binding Tow Bar - RV Mount - 2" Hitch - 10,500 lbs

(193)

$860.29

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(407)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(660)

$69.89

Roadmaster Battery Disconnect for Towed Vehicle w/ Flat Tow Brake System - Gas Only

(385)

$229.05

Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional

(509)

$1329.00

Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional

(767)

$1175.00

Question:

Are there any towing baseplates for a 2020 Colorado ZR2 Bison?

asked by: Dan C

Expert Reply:

Yes, there is! The Roadmaster Direct-Connect Base Plate Kit item # RM-523182-5 is going to be the best option. It has a specific set of instructions related to the ZR2 models. I have linked them below so you can take a look at it.

Here are the rest of the parts you will need to flat tow your 2020 Chevy Colorado ZR2 Bison:

Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

Battery Disconnect Switch - Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System - Gas item # RM-766

Supplemental Braking System - SMI Stay-IN-Play DUO Supplemental Braking System item # SM99251 or item # SM99243 if your motorhome has air brakes.

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.