Replacement Mounting Clamp For A Yakima SkyBox

Question

Question:

I got a Yakima cargo topper box for my birthday. I do not know which one it is. I need replacement mounts for it.

asked by: Courtney W

0

Expert Reply:

For your Yakima SkyBox, you are going to need the Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes # Y62XR.

This replacement clamp will work on all Yakima SkyBoxes, so if that's what you have this'll work fine.

If this is not what you have, feel free to send a picture in and I'd be happy to help.

expert reply by: Bryce D

0

Answer 1

The Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes part #Y62XR is an exact replacement for the Yakima Mounting Clamp 8890135 per Yakima. The only difference is the new design did away with the barrel nut but the bolt size and spacing are…

view full answer...

Answer 2

Hey Melissa, The max 42" crossbar spread of the Yakima SkyBox 18 Rooftop Cargo Box #Y07336 is actually pretty rare like what you found. The SuperLatch system that comes with this box is the only mounting hardware option for it, so there…

view full answer...

Answer 3

Thank you for all of the info and pictures! I forwarded them on to my contact at Yakima and it looks like you have the old SkyBox Pro 16 Silver 8007179. Even though this box has been discontinued we do have quite a few replacement parts for it: Cam…

view full answer...

Answer 4

The Replacement Seal Strips for Yakima SkyBox Series Rooftop Cargo Boxes part #8870086 isn't an upgrade, it's just a factory replacement for the seals that come with the box from the factory. These install inside the box, on the bottom under…

view full answer...

Answer 5

Unfortunately there is no lock housing upgrade available for the Yakima SpaceCadet. However, if you have an open locking mechanism (Which would look like a metal cylinder with a plastic plug or just nothing in it) and no lock cylinder, you can…

view full answer...

Answer 6

It does appear you have a Yakima BlackTop Pro cargo carrier. Unfortunately the only replacement part still manufactured for your box is the Replacement Mounting Clamp #Y62XR. You may be able to locate some of the lid supports in good used condition…

view full answer...

Answer 7

The widest portion of the Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes #Y62XR is 3-1/4".

view full answer...

Answer 8

Hello David, thanks for reaching out. Sounds like you are on the right track here. Both the Curt #C25FV (13568) and #C74MJ (13627) will fit all models of the 2024 CX-90 and this includes the PHEV plug-in hybrid model. This is actually a rare case…

view full answer...

Answer 9

I checked with Yakima and for your Skybox 16 the correct lid support for the rear is supposed to be part #8870072 and for the front is part #8870090. The picture you submitted shows a broken or twisted part #8870090 so that is what you'd need as…

view full answer...

Answer 10

Hi Dan, that is correct. Since you don't have any of the clamps and the #Y62XR is an individual clamp you will need a quantity of four.

view full answer...

Answer 11

Yes, the Replacement SuperLatch Handle Assemblies part #Y8880348 will be a direct replacement for your Yakima SkyBox 16s Rooftop Cargo Box 8007178. It is the exact same assembly that you have attached a photo of. I have attached a list of other…

view full answer...

Answer 12

It sounds like you are needing the lid supports for your Yakima SkyBox 16, part #Y07335. We have that here. It's part #8880683. These may look a bit different than what you are used to, but that is because Yakima has updated their supports. This…

view full answer...

Replacement Mounting Clamp For A Yakima SkyBox

Product Page this Question was Asked From

Continue Researching