Curt Trailer Wiring that Fits 2023 Kia Telluride XLINE

Question

Question:

When I enquire about the C29ZV this winter for my.2023 telluride Xline, I was told I could not use this harness because of LED lights on my car, is that still the case? .

asked by: Mike

0

Expert Reply:

Hey Mike, the Curt # C29ZV does fit your 2023 Kia Telluride Xline that does have the LED taillights.

expert reply by: Jameson C

0

Answer 1

Hello Mark, thanks for reaching out. The #C29ZV is the Curt part 56501. If you are looking for the Curt 56490, our part number for that is #C93FV. This is a T-Connector for a 2023 - 2024 Kia Telluride LX or S models without LED tail lights. The…

view full answer...

Answer 2

I'm not sure why they include that replacement latch but that is not required for any of the aftermarket hitches or wiring. It is probably something related to the installation of the OEM hitch. The etrailer #e45ZR you referenced is what I would…

view full answer...

Answer 3

Hi George, We can get your 2024 Kia Telluride a 7-way, but I checked with our manufacturers and unfortunately there isn't a plug-in option like you were wanting. So you would need a couple parts to add a 7-way, with the first one depending on the…

view full answer...

Answer 4

The Curt trailer wiring harness part #C93FV would be what I recommend for your 2023 Kia Telluride . This installs easily by plugging inline with your taillights and has a reliable converter box.

view full answer...

Answer 5

Curt does make really great trailer hitch and we do recommend them highly. We have a fit for your 2020 Hyundai Palisade too with the part #C13427 but the part number you mentioned is not a fit. This is a mostly hidden trailer hitch with plenty of…

view full answer...

Answer 6

Hi Jerrod; the correct wiring harness for your 2025 Hyundai Santa Fe HTRAC AWD is the Curt T-Connector Vehicle Wiring Harness #C29ZV you were looking at. This will plug into the connection points in your rear cargo area and then a hot lead will run…

view full answer...

Answer 7

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 8

Hey Eric, I am not seeing any other messages from you so I wonder if there was maybe a typo in your email address. But anyway for a hitch the etrailer part #e24ZV would be a great option for your 2025 Hyundai Santa Fe. Then for trailer wiring the…

view full answer...

Answer 9

Good question, Todd! I looked at some pictures we have of the Curt #C37RV hitch installed on a 2024 Hyundai Santa Fe and I think I found a good way to do it. Take a look at the picture I have included and you will see what I am thinking (circled in…

view full answer...

Answer 10

Hey Stephen, thanks for reaching out! For your setup I recommend picking up the etrailer Trailer Hitch Receiver #e45ZR and using the Curt T-Connector wiring kit for the basic 4-Way wiring. You'll need part #C93FV if you have an LX or S, OR the…

view full answer...

Answer 11

Kia Tellurides are in our install shop all the time for hitch and wiring installs since Kia typically will not install them at the factory. Manufacturers use "tow package" as a buzz word to charge you more typically so you'll want to…

view full answer...

Answer 12

You are 100% correct! The closest match and best option to upgrade your 7.50-16 LT bias ply tires, is going to be an ST235/85-16 radial tire, like the Kenda Karrier #AM32743B you were checking out. This tire is pre-mounted on a 16 inch diameter by 6…

view full answer...

Curt Trailer Wiring that Fits 2023 Kia Telluride XLINE

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching