Search: trailer tongue lock   >  

Hey Jeff, We do have the right replacement converter section for your Parallax model 7345, and what you need is the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel - 45 Amp #PD4645V.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Kennard, all of the hitches we carry for your 2019 Jeep Grand Cherokee Laredo do not allow the 20 inch size spare to fit including the Draw Tite part #75699 that you referenced. The problem is the bolts the run to the inboard side of the frame…

For the tire size ST225/75-15 in the Load Range D like the part #274-000029 the weight capacity is 2,540 lbs at 65 psi. Which with just four of these you'd be over the 10k GVWR of the trailer you mentioned so you should be fine.

Hey Lisa, So while I wouldn't' be able to tell you the exact drop you need for your ball mount when towing with your 2019 Toyota Highlander, but I can tell you how to determine the right one. It's actually really easy as you just need to…

According to the online owner's manual I looked over, the trailer running light circuit is protected by a 20A fuse located in location F29 in the fuse panel located in the engine compartment next to the battery.

You would want to get a etrailer Trailer Hitch Receiver & Coupler Lockset #e99039. You can select keyed alike from the drop down menu on the product page and then enter the quantity you would like. At this time the time the Master Lock Hitch…

Yes, the Curt Lock Set #C23556 will work with both the #C45900 and #C45902 meaning the 2-1/2" hitch won't be a problem. The pair of locks comes keyed alike but there is no option to match the keys between the sets of locks.

There are adapters on the market that can go from a cigarette lighter style plug that the #C-FOS07TAPK-006 has to USB/USB-C ports but we don't currently offer any so the only solution I can provide is the #RM-9332. This is a replacement outlet…

We do carry each of the parts that are available in that pack; I'll list the parts for you below. Replacement Socket Pin for Equal-i-zer Weight Distribution Systems #90-03-9212 (only comes with 1) Replacement Socket Pin Clip for Equal-i-zer…

The pin length of the #90-03-9212 is 2-5/16 inches and the diameter is 3/8 of an inch. The only difference between this part and #EQ95-01-9400 is that the #EQ95-01-9400 includes the retaining clip, while the #90-03-9212 does not. I'd recommend…

Hi Nathan; I've had this question in the past and unfortunately Yakima says the EasyRider #Y08129 cannot be stored standing up. You will need enough space with it sitting flat and the tongue folded to store it. The trailer is 79-3/4" wide…