Recommended Mounting Brackets For A Curt Trailer Wire Harness On A 2022 Honda Passport EX-L

Question

Question:

Which mounting bracket will fit my 2022 Honda Passport EX-L? I plan to install a 7-pin wiring harness CU86FR

asked by: Matt

0

Expert Reply:

Hey Matt,

To mount your Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # CU86FR I recommend picking up the No-Drill Mount Bracket # 18136 and 7-Pole Bracket # PK12711U you were already looking at. In the installation video for the # CU86FR Ryan strapped the long bracket to the hitch using the provided hose clamp and measured down to clear the fascia and and marked the bracket. He then removed the bracket and stuck it in a vice to bend it into an L-shape at that mark and then remounted it and bolted on the # PK12711U .

expert reply by: Kevin C

0

Answer 1

The best trailer hitch for your 2018 Honda Pilot EX-L for both accessories and towing is the following: - etrailer Trailer Hitch Receiver #e98840 I like the #e98840 because it's concealed so only the crosstube is showing, has very good bumper and…

view full answer...

Answer 2

It sounds like you are looking for a trailer wiring harness for your 2017 Honda Pilot. The easiest and most accurate way to determine whether or not your vehicle has the factory tow package is to simply visit your local Honda dealer and have them run…

view full answer...

Answer 3

You are on the right track. For a trailer hitch for your 2016 Honda Pilot the etrailer Hitch part #e98840 is a confirmed fit that would work well. Then for a 7-way you would want the part #118286 that is also a confirmed fit. The ball mount kit part…

view full answer...

Answer 4

To mount your 7-way wiring harness I recommend using the Draw-Tite Bracket, part #18138. I have attached a photo of the #18138. You can check the mounting holes on the trailer hitch to make sure they will match the mounting holes on the bracket and…

view full answer...

Answer 5

For your 2019 Honda Pilot the trailer hitch part #e98840 is a confirmed fit but it does hang lower than the factory hitch location normally does on your vehicle. I don't see a reason why the OEM wiring and the hitch wouldn't work together…

view full answer...

Answer 6

If you can access an open end of the frame where the weld nut broke off you could fishwire a new carriage bolt in place of the weldnut. Otherwise you may have to weld the hitch on or see if a local garage like you mentioned could come up with a way…

view full answer...

Answer 7

The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12107 is a confirmed fit for your 2017 Toyota Camry. It sounds like the holes may have been misdrilled at the manufacturer, but it is a higher probability that there could have…

view full answer...

Answer 8

You will still be able to use the trailer with the 4-Way after installing the 4 to 5-Way adapter, #20036. First, you could just remove the adapter if you wanted to and then plug in the 4-Way like normal while stowing the adapter in the truck. The…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Recommended Mounting Brackets For A Curt Trailer Wire Harness On A 2022 Honda Passport EX-L

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching