Replacement Landing Gear Legs for 2017 Open Range 293RLS

Question

Question:

Landing gear for 2017 Open Range 293RLS 5th wheel. Landing gear model 1A65012-02-01. Leg On the curb side driven leg without motor has locked up. Input shaft cannot be turned. I need a replacement leg. I don’t see a number on the leg. It doesn’t appear to be welded. Can you help?

asked by: Kelly H

0

Expert Reply:

Hey Kelly, so based on the part number you mentioned the correct replacement landing gear legs are the part # LC179013 for the lead leg or part # LC179014 for the follow leg.

expert reply by: Jameson C

0

Kelly H.

3/12/2024

Thanks. That was very helpful.

Answer 1

I sent all of this to my tech contact at LCI to see what they this is the problem and they were able to come up with a way to use the voltage readings to determine where the issue is: There are 4 wires on the harness as follows Black= power (need to…

view full answer...

Answer 2

You'll need a new jack leg based on what you described. For a replacement you'd want the part #LC241845 for the driver side or part #LC241846 for the lead leg that is normally on the passenger side.

view full answer...

Answer 3

The 241845 actually comes back to the Replacement Heavy-Duty Landing Gear Jack Leg #LC241845 which is the replacement leg for the Ground Control 2.0 which does not have a gear repair kit available so you would need to replace the leg with a new…

view full answer...

Answer 4

It sounds like you've got a Lippert Ground Control 3.0 system on your 2021 Grand Design Solitude 310GK, which the SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet - Qty 6 #SP54FR6 have been confirmed to fit on. These…

view full answer...

Answer 5

The correct replacement motor is part #LG-142178, and the Replacement Aluminum Gearbox, #LG-179015. The correct replacement switch is the part #LG-145236.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Landing Gear Legs for 2017 Open Range 293RLS

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching