See what our Experts say about this Lippert Accessories and Parts

• Is There a Leg Repair Kit Available for a LC241845 Leg
  The 241845 actually comes back to the Replacement Heavy-Duty Landing Gear Jack Leg # LC241845 which is the replacement leg for the Ground Control 2.0 which does not have a gear repair kit available so you would need to replace the leg with a new # LC241845. If this by chance is not the leg you think you have and can find a different number I would be happy to help further. But, as far as the 241845 is concerned this is the option.
  view full answer...
• Should I Replace The Lippert 2.0 Leveling System Leg?
  Hi Arlan! With that gear not turning at all, I would wonder if that was actually the cause of the shaft snapping as you should be able to turn it while not under load. Even if it wasn't, I would then be worried the shaft snapping could also have damaged other internal components, causing it to seize. So if something like this happened to me, I would replace the whole leg with one of the following parts, just to be certain everything is going to work properly. Lippert Replacement Heavy-Duty...
  view full answer...
• Lippert 2.0 Ground Control Landing Gear Problem Solution
  You'll need a new jack leg based on what you described. For a replacement you'd want the part # LC241845 for the driver side or part # LC241846 for the lead leg that is normally on the passenger side.
  view full answer...
• Is Lippert Ground Control 2.0 System Compatible with 3.0 Motor and Leg?
  The Lippert 2.0 system is not compatible with the motors on the 3.0 system. The 3.0 system uses electric motors that utilize the hall effect where the 2.0 system does not. This is a completely different design which makes the motor and legs incompatible with the controller and wiring of the 2.0 system. You will need to upgrade your system if you desire that style as your system has been replaced. For the 2.0 system we have the Replacement Heavy-Duty Landing Gear Jack Leg for Ground...
  view full answer...
• Correct Replacement 29-1/2" Landing Gear Jack for Lippert Ground Control 2.0
  Since the landing gear jack on your Lippert Ground Control 2.0 is the standard 29-1/2" height then you need the part # LC241846. The other part # LC241845 that you referenced is for if you had the longer version with the 33-1/2" measurement. The length is the only difference between the 2 options.
  view full answer...
• Is There a Replacement Bevel Gear Kit for Lippert Ground Control 2.0 Front Landing Gear
  I spoke with my contact at Lippert Components about what the correct replacement bevel gear kit would be for the front landing gear on your 2017 Open Range Roamer 371MBH. He said that the front landing gear for the Ground Control 2.0 actually doesn't have a replacement bevel gear kit so unfortunately you will need to replace both legs. For the standard landing gear you would need part # LC241846 if the outer black tube on your current gear measures 29-1/2". If the outer black tube measures...
  view full answer...
• Replacement Driver Leg for Lippert Ground Control 2.0 System
  I have a solution for you and just as an FYI, Lippert had some difficulties with manufacturing and materials procurement during the pandemic; the Heavy Duty Driver Leg for Lippert Ground Control 2.0 Landing Gear # LC241846 was one of their parts that they had to stop producing briefly. They have recently (spring 2021) started production on these and expect them to be back in circulation at some point in the next couple of months. With regards to your main question, the # LC241846 is 29-1/2"...
  view full answer...
• Correct Replacement Lead Landing Gear Leg for Open Range Roamer with Ground Control 2.0
  The correct replacement lead landing gear leg for a Ground Control 2.0 Leveling System is the Replacement Heavy Duty Driver Leg for Lippert Ground Control 2.0 Landing Gear part # LC241846 for standard (29-1/2" outer tuber body) or part # LC241845 for extended (33-1/2" outer tube body).
  view full answer...
• Lead and Follow Leg Replacement for Crusader 5th Wheel
  If you have the Lippert Ground Control 2.0 Electric Leveling System on the Crusader 5th Wheel then you'll need the Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 part # LC241846 for 29-1/2" outer tube or part # LC241845 for 33-1/2" outer tube. They will work on either side of the trailer.
  view full answer...
• Replacement Heavy Duty Landing Gear Jack Leg For Lippert Ground Control 2.0
  The Replacement Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 - Extended # LC241845 is a replacement for the Heavy-Duty Landing Gear Jack Leg for Ground Control 2.0 and will work on either side.
  view full answer...
• Replacement Leg for Lippert Ground Control 2.0 LC241846
  The Lippert part number you referenced is for the Ground Control 2.0 system which you'd have to use the part # LC241845 as a replacement for. There isn't a Stromberg part number that will work.
  view full answer...

Do you have a question about this Accessories and Part?