Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the OEM follow leg for Keystone Montana fifth wheel landing gear.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna be taking a look at the Lippert Replacement Follow Leg for your Keystone Montana Fifth Wheel Landing Gear. This is going to be a direct replacement for that OEM landing gear on your Keystone Montana. It comes with the safety clip there and drop leg. You can see there . Just replace the pin back in there, once we get that hole lined up to secure that drop leg. As far as the dimensions on this for the weld stops, they're going to be roughly from the inner edge of the two tallest ones, or from the top one to the first one on here.It's going to be about 15 1/2 inches, the outer dimensions on that are gonna be 17 1/2 inches to the lower weld stop.
The inner dimension is going to be 19 1/2 inches and then the outer dimension will be 21 1/2 inches. The dimension on the outer shaft here from the top to the bottom is going to be 29 1/2. As far as the width of the leg itself, that's gonna be about 2 1/2 inches. That's gonna do it for our look at the Replacement Follow Leg for your Keystone Montana Fifth Wheel Landing Gear.
Fit as advertised and works better than the original.
The packaged arrived in a very short time from the date it was ordered.
When I went to install this leg did not fit the mounting brackets on my 5th wheel. i lined up with the catch locking tabs on the leg, I had to grind a 1/16 of an inch off the middle lower tab so it would catch the top tab correctly. And this leg was strictly for a keystone montana.
Other than that it fit fine and works nice and smoothly.
Leg is working great
Not hard to install. Need hydraulic jack made lifting trailer easy
Bob
7/1/2020
Great product
Outstanding service. I dealt with Liz. She was great to do with. Very helpful.
etrailer.com was very knowledgeable in helping me select the correct landing gear follow leg. I received the product in just 2-3 days and it was a breeze to install. I had should a good experience that I will definitely use etrailer.com in the future again.
Replacement follower jack fit perfect. I added some additional grease to the gears and leg screw mechanism. A couple of zerk fittings would be beneficial. Bryan was helpful when discussing the purchase. Once again etrailer delivered as promised.
5 star service but had to grind off 1/8 inch on the slave side and 1/16 inch on drive side of trailer Bevels not a big deal
Kevin
10/6/2022
Perfect no problems
This is listed as a Keystone Montana follow leg jack, but the mounts are on the wrong side for my Keystone Montana. On this leg the mounts that hold the jack from moving up and down are in the same side as the shaft, on my Keystone Montana they are on the opposite side of the shaft. After looking, the lead leg you carry is the same way, which is opposite of mine also. Luckily I was able to pull the guts out and swap them with my old jack so I am up and running again.
Lock tabs are on the wrong side. Does not fit 2008 Keystone Montana Mountaineer.
Gwendolyn Y.
6/17/2025
Hey Mark. I'm sorry to hear the replacement leg isn't working out for you. Usually you want the weld stops to be facing away from the frame, I've linked a QnA that has a pretty good diagram. If yours is not like that, let me know. If there is any other fitment issues let me know and I can track down the right replacement for you, Mark.
Helpful Links
the landing gear has been excellent!! without a doubt was one of my best purchases that I have made online
thank you etrailer for the best on line equipment ......
The jack was exactly what I had ordered and fit and worked perfectly in my Montana fifthwheel.
Product is doing what it is supposed to do. All is good so far.
Product was excellent perfect replacement . Phone call was quick and knowledge of knowing which leg was required
Excellent help! We needed a jack leg quickly. A lady helped me get the right one quickly. I had tried another website along with a few other camper dealer locations and all could not help in a timely manner. Thank you so much!
The new landing gear resolved much head ache from the old one, that was repaired multiple times.
Perfect replacement piece for my 2010 keystone montana mountaineer 345dbq. We have completely remodeled our entire rig and this was the easiest replacement of any of the work that we did. I'm a DIY guy and this was easier than changing the oil in your car.
Fast delivery. Part worked perfectly. Quick install! The only reason I gets four stars is because it only came with the part and no hardware. On previous videos I’ve watched on YouTube they included hardware. Not on this delivery.
Overall great product, great service, would have been nice to get the hardware.
Fix the 5th wheel as it should have.
Delivered sooner than I expected Montana specs super duty as ordered. Should be an easy swap. Might also order replacement quick lock for extension at same time.
I have not installed yet but looks beefy enough
Fred
10/23/2023
Good
Lost a front landing jack while on the road. Rachel got the correct jack to me in 3 days during the Thanksgiving holidays. Super pleased with these guys.
Sturdy, great looking legs. And I am a leg man so I would know! :)
Easy to install and was an exact match for the OEM part.
Great service, and unlike any of the other places I've tried to deal with they actually have things in stock and are able to tell you when they will arrive.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Martin
10/17/2022
So far no issues with both the front jacks,we are full time RVs and we move about every 3 weeks.