Recommended Replacement Axle and Brakes for An Axis Products 93" Trailer Axle
Updated 03/05/2024 | Published 03/04/2024 >
Products Featured in This Question
Question:
I have a carry-on trailer with an Axis Products Axle 3K8874 - SN 504504 130 - 6/07. I would like to replace to purchase a replacement axle with electric trailer brakes. What axle do I need, what other hardware will I need to convert to electric trailer brakes? Do you recommend replacing the leaf springs at this time? Thank you, Eddie Simmers
asked by: Eddie S
Expert Reply:
Hey Eddie, I do have an option for you but the closest axle we offer for what you're looking for is the Trailer Axle Beam with Easy Grease Spindles # e93GR which measures 94" at the hub face and 79" at the spring center.
Since this'll be used to replace a trailer axle with a 93" hub face, the wheels/tires are going to stick out a 1/2" more on each side At this point, the spring seats can then be cut and rewelded.
To convert your presumably surge brakes to electric, you're going to need to remove the surge coupler or actuator, remove all the lines, and the brake assemblies. If you have 10 inch diameter hub and drums, you may need to replace those as well but If you have 12 inch hub and drums, you can re-use them so long as they are in good shape.
You will then need to install your new electric brake assemblies, like # AKEBRK-7-SA for the left and right hand sides. You will also need a new coupler, which is going to depend on the frame of the trailer.
I've also added an FAQ for you to check out as well as a link to our couplers so you can browse those as well.
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 94" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 79 Inch Spring Center
- 94 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Search Results: wheel lock
- Search Results: demco
- Search Results: hinge
- Search Results: ladder rack
- Search Results: ra28
- Search Results: coupler lock
- Search Results: e track
- Shop: Ladder Rack
- Shop: RV Designer Gas Strut - 20" Long - 40 lbs Force
- Shop: Front Mount Hitch
- Shop: Dexstar Dual Wheel with Offset - 16 x 6 Rim - 8 on 6.5
- Shop: Vesper Steel Dual Trailer Wheel - 16" x 6" - 8 on 6-1/2 - 4.88" Pilot - Silver
- Shop: Hydraulic Flex Hose - 18" long
- Shop: Rack'Em Fitz-All Enclosed Trailer Ladder Rack
- Shop: Pack'Em Flips-All Ladder Rack For Enclosed Trailers up to 7'
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector


