Best Jounce Style Aftermarket Suspension Kit for a 2023 Toyota Tacoma

Question

Question:

I want to add a bump stop style of suspension kit on my 2023 Tacoma and I would just like a recommendation on what is best. TIA

asked by: Marty

0

Expert Reply:

The best jounce-style springs for your 2023 Toyota Tacoma are the SumoSprings Solo Custom Helper Springs # SSR-612-47 because they are rated for 1,800 lbs and have a progressive load feature which means you won't notice they are there until your Tacoma is under a load.

The Timbren brand is a really popular brand but those springs are much more stiff so even when they are engaging it feels more stiff whereas the SumoSprings have more of a "soft" engagement so your ride quality won't suffer when they are being used.

Attached is an installation video of this kit on a 2023 Tacoma for you to check out.

expert reply by: Jon G

0

SumoSprings Installed on a 2023 Toyota Tacoma
(click to enlarge)

Answer 1

Hi Shawn! The SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-612-47 are indeed the correct part for your 2025 Nissan Frontier King Cab 2 wheel drive. This is a pretty quick and easy install and once done, it doesn't need to be touched…

view full answer...

Answer 2

Just like the SumoSprings Solo Custom Helper Springs #SSR-612-47, the Timbren Rear Suspension Enhancement System #TTORTUN4L will also replace the factory bump stops and mount directly over the axle, there is no offset. As far as actual lift goes,…

view full answer...

Answer 3

Hi Don; what did you have in mind for load leveling? Are you looking for suspension enhancement for your 2022 Nissan Frontier to keep it level? If so, I recommend the SumoSprings #SS96EV (Crew Cab) or #SSR-612-47 (King Cab). These will smooth out the…

view full answer...

Answer 4

The SumoSprings Solo Custom Helper Springs for a 2023 Nissan Frontier, part #SS46EV for a 1,800 lb capacity and part #SS96EV for a 1,400 lb capacity, measure 4" tall and they come with a 1/2" spacer. You'll want to shoot for about a…

view full answer...

Answer 5

No, It doesn't but I have a set that does. Since your 2025 Nissan Frontier has the king cab you'll need the SumoSprings Solo Custom Helper Springs item #SSR-612-47. These have a 1,800 lbs capacity and are specifically designed to fit the king…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...