by: JohnG08/11/2026
The Sumo Springs worked great in my 2022 Nissan Frontier and stopped the rear from sagging under trailer load but rode like normal unloaded. Very good product and very easy to install.3605051
by: Justin08/29/2026
This only pertains to the order, shipping speed, and install as I have not put a heavy load on these sumo Springs yet but I feel like that's a foregone conclusion based off the reviews already. The ordering process, the shipping, and the installation was unbelievably easy. I kept rereading the instructions thinking this can't be right because it was so simple. I looked at the YouTube video and realized it is that simple! So happy with the ordering process, the quality of the initial product I opened, and how simple it was to put on the jeep.3617107
by: David J05/16/2025
I was surprised at how much of a difference these actually make. I bought them based on some videos of others using them, but wasn't sure if they would actually make much difference in my situation. I tow a 6800lb trailer with a Silverado 1500. With the tongue weight of that trailer, the rear of the truck doesn't drop all that much and I wasn't sure if replacing the bump stops was even necessary, but when I'm on roads with "heaves" and especially bridges where porpoising can be a problem, these SumoSpring certainly help. You probably won't notice some huge drastic change, but it's just enough to matter and even out the ride to a noticeable degree. Also, they're pretty easy to install (and I'm only barely handy when it comes to this stuff.)3323278
by: Honky Tonk Man06/29/2026
I've never put on a easier product. I put the jack under the trailer hitch mount. Just lifted the body 1-2 inches and used a 12 mm socket . The socket removed the old ones and I hand tightened the new on. Literally took 10 minutes and a beer.3575287
by: Paul Hornaday02/20/2026
Great product! Bought these for my 2000 7.3 f250. Didn't want something that is constantly active like ras or hellwig since my leaf springs are new and rated for 4k pounds. Installed these in 1 hr super simple only hard part was the factory bump stop on driver side was a pain. Didn't install the puck they give due to height of truck and I knew more or less at what point I wanted them engaging. I haul cattle to shows/ auctions or between pastures with my 24ft big bend and these things actually provided a smoother ride in my truck loaded then unloaded.they do a great job with the added support and are better than an overload spring with handling sway and providing a smooth ride loaded. Just wish I could use the 3k pound rated ones on this truck and my dually but doesn't fit if you have a gooseneck sadly so will probably have to go with timbs on the drw. Over all great product can't speak to longevity but solid for the time being. And customer service with this company is excellent if you have a question or problem they're on top of it...hope they pay them as well as the reputation they're building for them.3489629
by: Mike B04/23/2024
I bought and installed the 1000lb Sumo Solo springs to help alleviate rear end squat on my 2024 GMC Canyon Denali when pulling my boat. My boat trailer has a long mono tongue with no weight distribution installed. The boat weighs in at about 5500lbs, the truck fender lip measures 38” high unloaded, once I dropped the hitch down on the ball and the Sumos picked up the load, the fenders measured 36.25” equating to an inch and 3/4 squat. Empty the Sumos have an apx gap of 7/8” above the frame rails. The Sumos were recommended over the Timbrens for my situation of infrequent towing with this truck and to maintain the best ride possible when not towing. So far my ride is virtually unchanged when empty and feels controlled when towing. Installation is straight forward but the instructions could be a little clearer with a diagram showing the intended location of the springs. Luckily an etrailer customer had already done the install and provided some pics so there was no question. I chose to remove the tires to have good access and I’d do it again this way. I supported the truck with a jack stand under the receiver. IMHO the proper method to locate the over frame upper clamp brackets is to push the forward clamp as far forward until it contacts the bed stiffener and you’ll be in the correct location then let all the hardware hang to position itself, tighten as required and enjoy.1771904
by: Kevin07/19/2026
Installed these right before a long road trip, and were impressed with how much the ride improved. Opted not to include the spacers, which has worked out fine. While not towing have not noticed any change to the ride, which is good. When towing the steering has a solid grip on the road now (sometimes felt a little loose before installing these) and no more issues with 'porpoising'. We drove across a several mile long bridge in the Bay Area that likely would have been a roller coaster ride previously, and had no issues. Quick and easy to install.3587884
by: Morgan07/14/2026
Put these on a Jeep Gladiator to haul a motorcycle to Sturgis. Kept everything level, good ride and stability. Highly recommend.3584483
by: Albert07/12/2024
I had installed this model SumoSpring on my 2019 4Runner and had great results when towing the camper I had at the time. They greatly reduce the bounce when going over dips in the road at highway speeds. Now I have a 2021 Titan and a bigger heavier camper. I expect the same great results on the Titan. Installation was pretty straight forward and took about a half hour. The size difference between the OEM bump stops and the SumoSprings alone should give a better ride when towing my camper.3174937
by: Austin07/29/2026
Product is great, exceeded my expectations. Install is simple and straightforward. It’s a night and day difference in both the body roll and the handling small bumps all the way up to off-road conditions.3596661
by: Chad05/18/2026
Love them! The truck barely even squatted, had two dirt bikes, and a generator in the bed as well! It handles the bumps and sway great3547840
by: Mike07/21/2024
I got the springs installed last week and wanted to have a drive time before I wrote the review.
The height of the springs are perfect for my 2016 Tacoma, They keep the truck stable and nearly eliminate the body roll I had before installing them. I am heading to the mountains in a couple weeks, so I will update the review when I get back. That way I will know for sure the body roll is gone and the truck is stable on the winding mountain roads.
The springs installed in no time at all and since I had the rear end apart, I decided to add the leveling blocks at the same time, to keep the truck from squatting with the gear I haul around with me.
The guys at etrailer are great. And while I did not call them to discuss this item, they have been very helpful in the past with all my questions.
Below are pictures of before, a couple comparisons and after. Sorry if they come out sideways.
These Sumo Springs were a great addition to my Tacoma and well worth the money, IMHO.3179658
by: Richard02/10/2025
Opted for the Blue 1000lb Sumo's w/spacer over the 1500lb Black ones. 1500 Silverado Max Tow & reduces squatting by 2" on a 1000lb+ tongue weight. Ride is still good, but you can feel the Sumo's engage over large dips or bumps which is not an issue for me.3262392
by: Michael05/09/2026
2025 Promaster 2500 159” wheelbase. Backed the van on couple 2” X 6 “ easier sliding under. Sprayed PB Blaster on top of bumper spring, using a 16” Channel Lock, easy off with the old. At that time I jacked the rear end to allow clearance. One side at a time. Took longer for set up then the job. I used the long bolt with two spacers. Have not drove yet, though looking for great results.3542076
by: Randall08/11/2026
I put these on a 2013 Jeep JK (not lifted) that tows a 3000 lb trailer in rough terrain; Total game changer.
These replaced the anemic factory stops (which had completely disintegrated) and make it impossible to 'bottom out' on the dips and holes that use to beat up the suspension. I got nearly all of my vertical travel back and the vehicle now sits almost level under high tongue load.
They go on pretty easy. I suggest sliding in one side, and then using a wooden dowel and hammer to pop the other side in the stock receiver cup.
Highly recommended. These are a MUST if you are towing a trailer (with a medium sized SUV) of any significant weight or if you just want to be able to bounce hard without bottoming out your suspension. I am likely going to get the front suspension version now as well.
Wish I knew these existed sooner.3605434
by: Thomas 10/20/2022
1452056
by: Tim 12/16/2022
1485522
by: Mark03/31/2026
3515370
by: Mike 06/30/2024
Works as advertised. 3168181
by: Nissan proX04/21/2024
Truly bouncy when not having any weight in the back1771014
by: Daniel C09/02/2022
Fit as expected and performed as expected on my 2022 Nissan Frontier Pro-X.1389742
by: Fahri10/06/2022
Works great on my 2022 Nissan.. 1441135
by: Aaron09/29/2022
Installed on my 22 frontier. Took longer to Jack the vehicle up and remove the tire than the actual install of these springs. I tow a travel trailer that weights approx 3500lbs truck doesn’t sag. Ride quality is amazing while loaded. A bit on the stiffer side for everyday driving but not terrible. Noticeably less body roll in turns.1430128
by: Frank05/11/2026
Much improvement from factory ones. Its quick and easy install.3542904
by: Aaron08/26/2026
Great product. Only installed for a day but a noticeable difference in ride quality. My camping setup is heavy and this takes the weight. Install took less than 20 minutes.3614903
Fahri
10/7/2023
Perfect, thanks