What 4-Way Wiring Harness Fits My 2021 Mitsubishi Outlander Sport?

Question

Question:

Hello, I tried to have a company wire up a light cord for my 2021 Mitsubishi Outlander Sport about a year ago. I was told that no wire harness existed because Mitsubishi had switched the pins from square to flat halfway through the production year or possibly vise versa, I dont remember, only that the item that was ordered from you did not fit my vehicle. I waited a year and now am looking around again for a wire harness set up so I can haul a 4 prong flat trailer. Im including pictures of what I think is the connection point. Would you please tell me if item number TK67VR will work for my vehicle. I believe I have flat pins. Thank you.

asked by: Daniel P

0

Expert Reply:

I have a way you can verify what wiring connector you need. Since I do not have access to the vehicle specs of your 2021 Mitsubishi Outlander Sport, the only way to verify what plug style you have on your taillights, you need to physically check the plugs on the lights. If you in fact have square plugs, the # TK67VR is definitely the right harness. If you confirm that you have the flat design, you need the splice-in kit # C59496.

expert reply by: Bob C

0

Answer 1

Hey Briawnna, The Draw-Tite Max-Frame Trailer Hitch Receiver #76138 has a 3.5" measurement from the center of the hitch pin hole back to the end of the receiver tube so it would work with your VelociRAX 412 bike rack. This hitch also has a 675lb…

view full answer...

Answer 2

The Draw-Tite Class III hitch, part #76138 is indeed a fit for a 2022 Mazda CX-5. Because the muffler on your vehicle is very large and is positioned at the center of the vehicle, it'll need to be temporarily lowered as shown in the linked…

view full answer...

Answer 3

For your 2023 Mazda CX-5, I recommend checking out the: -Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit #76138. This trailer hitch has a maximum towing capacity of 4,500-lbs, a maximum tongue weight capacity of 675-lbs, and has a class III…

view full answer...

Answer 4

The best hitch for a 2024 Mazda CX-5 is the etrailer item #e98902. This hitch is custom fit and bolts to your Mazda with included hardware. This hitch is custom fit and bolts to your Mazda with included hardware. The etrailer hitch item #e98902 is a…

view full answer...

Answer 5

Since the Draw Tite Hitch part #76138 that fits your 2021 Mazda CX-5 has a slightly higher towing capacity than the Curt #C13315 it would be my recommendation as best option. If you were looking for trailer wiring too the Tekonsha kit part #118746 is…

view full answer...

Answer 6

Just a single difference exists between the Curt and etrailer trailer hitches for your 2024 Mazda CX-5, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which you…

view full answer...

Answer 7

That's a good question because the differences can certainly be subtle. The 2" trailer hitches that fit your 2019 Mazda CX-5 are the Draw-Tite Trailer Hitch Receiver #76138, etrailer.com Trailer Hitch Receiver #e98902, and Curt Trailer Hitch…

view full answer...

Answer 8

The Curt #C13315 and the Draw Tite part #76138 for your 2019 Mazda CX-5 are both really great options that would both work great for you, but if I had to pick one over the other I would go with the Curt as it is a little less visible at the rear of…

view full answer...

Answer 9

I recommend our etrailer Trailer Hitch Receiver #e98902 for your 2024 Mazda CX-5. This receiver has the more commonly found 2" receiver opening allowing for a larger selection of hitch mounted accessories and ball mounts. It also has the matte…

view full answer...

Answer 10

The best hitch for your 2023 Mazda CX-5 is going to be the Draw-Tite Trailer Hitch item #76138. This hitch is custom fit and bolts to your Mazda with included hardware. I really like the Draw-Tite hitch because it installs behind your rear bumper and…

view full answer...

Answer 11

Absolutely! For your 2021 Mazda CX-5 there are a few different Class III Trailer Hitch options, the Draw-Tite #76138, the Curt #C13315, the etrailer #e98902, and lastly the #EH68VR. Starting with the similarities each of these hitches has a hidden…

view full answer...

Answer 12

Hey Craig, there isn't really a difference between the Curt #C59236 and #C56331. The main difference is that #C56331 is custom so it'll plug in line with your OEM wiring, and #C59236 is universal and can be spliced into any vehicle's…

view full answer...

What 4-Way Wiring Harness Fits My 2021 Mitsubishi Outlander Sport?

Products Featured in This Question

Continue Researching