Availability of 4-Way Wiring Kit for 2023 Mazda CX-5

Question

Question:

Do you offer a plug and play trailer wire kit for 2022 Mazda cx5

asked by: Mike

0

Expert Reply:

At this time, a plug an play wiring harness is not available for the 2022 Mazda CX-5. The only option is the Vehicle Wiring Harness with Installation Kit # C59496. This is a universal splice in harness that will provide you with a 4-way to power your trailer's signal lights.

expert reply by: Robin H

0

Answer 1

Hey Briawnna, The Draw-Tite Max-Frame Trailer Hitch Receiver #76138 has a 3.5" measurement from the center of the hitch pin hole back to the end of the receiver tube so it would work with your VelociRAX 412 bike rack. This hitch also has a 675lb…

view full answer...

Answer 2

The best hitch for a 2024 Mazda CX-5 is the etrailer item #e98902. This hitch is custom fit and bolts to your Mazda with included hardware. This hitch is custom fit and bolts to your Mazda with included hardware. The etrailer hitch item #e98902 is a…

view full answer...

Answer 3

The Draw-Tite Class III hitch, part #76138 is indeed a fit for a 2022 Mazda CX-5. Because the muffler on your vehicle is very large and is positioned at the center of the vehicle, it'll need to be temporarily lowered as shown in the linked…

view full answer...

Answer 4

Just a single difference exists between the Curt and etrailer trailer hitches for your 2024 Mazda CX-5, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which you…

view full answer...

Answer 5

I do have a solution for you to carry both of your bikes with your Mazda CX-5 but unfortunately an adapter like part #HTAD isn't the way that I recommend going. Not only does it cut the weight rating of your trailer hitch in half, it will also…

view full answer...

Answer 6

Absolutely! For your 2021 Mazda CX-5 there are a few different Class III Trailer Hitch options, the Draw-Tite #76138, the Curt #C13315, the etrailer #e98902, and lastly the #EH68VR. Starting with the similarities each of these hitches has a hidden…

view full answer...

Answer 7

I recommend our etrailer Trailer Hitch Receiver #e98902 for your 2024 Mazda CX-5. I prefer this receiver as it has the hidden cross tube and a matte black finish for a clean factory appearance. The Curt Powered Tail Light Converter #C59496 will give…

view full answer...

Answer 8

The best hitch for your 2023 Mazda CX-5 is going to be the Draw-Tite Trailer Hitch item #76138. This hitch is custom fit and bolts to your Mazda with included hardware. I really like the Draw-Tite hitch because it installs behind your rear bumper and…

view full answer...

Answer 9

Since the Draw Tite Hitch part #76138 that fits your 2021 Mazda CX-5 has a slightly higher towing capacity than the Curt #C13315 it would be my recommendation as best option. If you were looking for trailer wiring too the Tekonsha kit part #118746 is…

view full answer...

Answer 10

A support strap, like part #18050, is required by warranty on many Curt trailer hitch receivers for non-towing applications. However, the Curt Class III hitch for a 2017 Mazda CX-5, part #C13315, does not have this requirement. I verified with Curt…

view full answer...

Answer 11

That's a good question because the differences can certainly be subtle. The 2" trailer hitches that fit your 2019 Mazda CX-5 are the Draw-Tite Trailer Hitch Receiver #76138, etrailer.com Trailer Hitch Receiver #e98902, and Curt Trailer Hitch…

view full answer...

Answer 12

Hey Craig, there isn't really a difference between the Curt #C59236 and #C56331. The main difference is that #C56331 is custom so it'll plug in line with your OEM wiring, and #C59236 is universal and can be spliced into any vehicle's…

view full answer...

Availability of 4-Way Wiring Kit for 2023 Mazda CX-5

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching