Does The Draw-Tite DT42MR Require Bumper Trimming On A 2024 Acura MDX?

Question

Question:

Hello can you tell me if this draw tite hitch DT42MR requires cutting of the bumper on a 2024 Acura MDX? Thank you

asked by: Herb

0

Expert Reply:

Yes, cutting of the bumper fascia will be required when installing the Draw-Tite # DT42MR on a 2024 Acura MDX. You are basically cutting a 4" x 3.5" rectangle (see the image below). So the instructions are clear on exactly where to cut. I have also linked our install video below if you want to see how it's done.

expert reply by: Jesse M

0

DT42MR Cumper Trimming Diagram
(click to enlarge)

Answer 1

The difference between the Draw-Tite #DT42MR and the etrailer #e27KR and Curt #C22HR trailer hitches for your 2023 Acura MDX is actually the amount of rear clearance as opposed to ground clearance. Ground clearance is the same between these hitches…

view full answer...

Answer 2

I will be happy to clear up the confusion for you. The Curt Trailer Hitch Receiver item #C22HR you referenced and the Draw-Tite Max-Frame Trailer Hitch Receiver item #DT42MR will only accommodate the 18" spare on your 2022 Acura MDX. These are…

view full answer...

Answer 3

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT42MR does require cutting a 4" x 3-1/2" portion of the fascia on your 2023 Acura MDX. For a hitch that does not require any fascia cutting use the etrailer Trailer Hitch Receiver #e27KR.

view full answer...

Answer 4

No, it doesn't but there is an etrailer one that does. It is the etrailer Hitch item #e27KR. This hitch is custom fit and bolts to your 2023 Acura MDX with included hardware. It is also a class III hitch with a 2" receiver. I have linked an…

view full answer...

Answer 5

The Acura MDX is the 'sister' vehicle to the Honda Pilot. The MDX and Pilot typically don't have problems with the hitch interfering with the liftgate sensors. I believe you're thinking about the RDX/Honda CR-V which frequently has an…

view full answer...

Answer 6

Hey Richard. The Draw-Tite Hitch item #DT42MR has the same spare tire restrictions as the other two hitches that fit the 2025 Acura MDX. This hitch does require trimming of the rear fascia. I have attached a picture below from the instructions that…

view full answer...

Answer 7

Hey Miguel! The etrailer #e27KR fits all models of the 2023 Acura MDX, including your Type S. Keep in mind, if you have a full size spare none of the hitches will fit unless you're willing to remove it. This Class III hitch has a bolt-on…

view full answer...

Answer 8

To add a hitch to your 2023 Acura MDX, I recommend the etrailer Hitch item #e27KR. This hitch is custom fit and bolts to your Acura with included hardware. I really like this hitch because the cross tube installs behind your rear bumper cover. This…

view full answer...

Answer 9

Yes, there is a hitch for your 2024 Acura MDX. The best one is going to be the etrailer Hitch item #e27KR. This hitch is custom fit and bolts to your Acura with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item #C22HR you referenced fits the 2022 Acura MDX regardless of the size of the spare tire. The issue with yours is that the 21 inch wheel will not be able to be remounted after the…

view full answer...

Answer 11

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT42MR you mention does in fact fit your 2022 Acura MDX. This hitch has a maximum towing capacity of 6,000-lbs, a maximum tongue weight of 900-lbs, and has a sturdy square tube design that features…

view full answer...

Answer 12

I would be happy to help you. The difference in the installation time between the two hitch receiver's on your 2022 Acura MDX is that the Curt item #C22HR sits lower when mounted so it does not requiring trimming of the rear bumper cover. The…

view full answer...

Does The Draw-Tite DT42MR Require Bumper Trimming On A 2024 Acura MDX?

Featured Help Information

Miscellaneous Media

Continue Researching