Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2022 Ford Bronco Black Diamond Edition

Question

Question:

Can you send me the correct part numbers, so I can purchase a tow hitch assembly and a trailer light wiring harness for a 2022 Ford Bronco full-size Black Diamond Edition? Thank you in advance!

asked by: Derek S

0

Expert Reply:

For your 2022 Ford Bronco you have a couple choices I want you to consider for the trailer hitch receiver. First the Curt # C76WR is going to give you the best ground clearance and departure angle if you like to off-road. Otherwise the Draw-Tite # DT37GR is going to be a better option with its extended receiver tube. This extended receiver tube saves you from having to install an Extension # Y69VR with some hitch mounted accessories like bike racks which do not have enough clearance due to having the spare tire mounted on the back.

The Curt T-Connector Vehicle Wiring Harness # C87BR will give you a 4-way flat connector which is the most common connector found on small trailers. You can attach this to the tab on the Draw-Tite receiver using a Mounting Bracket # 18144.

expert reply by: Bud M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…

view full answer...

Answer 12

Yes, it will Frank. We haven't had a chance to install the Yakima StepUp Swing Away Bike Rack item #Y22RX a 2024 Ford Bronco Sasquatch edition but there's plenty of clearance with the standard spare. The swing away arm provides quite a bit of…

view full answer...

Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2022 Ford Bronco Black Diamond Edition

Products Featured in This Question

Continue Researching