Availability of Blue Ox D-Ring Adapter that Fits Smittybilt Stryker Bumper

Question

Question:

Will this item correctly fit my Smittybilt Stryker bumper mounted on my 2022 Jeep Gladiator? Im using a Blue Ox Alpha tow bar behind my RV. Blue Ox Off-Road Bumper Adapters for Blue Ox Motorhome Mounted Tow Bars - 7/8 D-Rings Item # BX88357

asked by: Dale N

0

Expert Reply:

I don't have a way to verify what D-ring size you have on your Smittybilt Stryker but if what you have is the 7/8 inch size you would need the part # BX88357 or if they are 1 inch you'd want the part # BX88358. Both of these are compatible with your Blue Ox Alpha.

expert reply by: Jameson C

0

Answer 1

Yes, we do! It is the Hopkins Custom Tail Light Wiring Kit item #HM39VR. This will give you a plug and play set up to control your 2020 Jeep Wrangler's lights with your RV.

view full answer...

Answer 2

Yes, you can bypass the door switch on your Lippert steps. You can do this by connecting the two wires together. If your steps operate then you know the switch is bad and can replace it with the Replacement Door Switch #LC301694 if you have the…

view full answer...

Answer 3

Thanks for that photo, and since you have a bumper with D-ring attachments, you would not need base plates; in fact, base plates wouldn't be able to be installed, so instead you would need a bumper adapter that attaches to the D-ring attachments.…

view full answer...

Answer 4

Hey Doug! The Curt RVi Series Towed Battery Charger+ (TBC+) for Flat Towing #RVI74FR actually installs on the vehicle side so it will go in your 2025 Ranger Raptor. Your Jayco probably has a charge line already, which would be a 12V line running…

view full answer...

Answer 5

Hello Kyle, thanks for reaching out. The 12 Volt auxiliary terminal on your 7-way connector can be used to keep the battery on your trailer charged. You will need to run a 10 gauge power wire like #10-1-1 from the 12 volt auxiliary terminal on the…

view full answer...

Answer 6

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 7

To connect your Blue Ox tow bar, such as their Alpha #BX7380, to your Wrangler Unlimited's towing bumper's 1-inch D-rings you will want adapter kit #BX88358. This includes the 7/8-inch pins and retaining clips. You can see how this installs…

view full answer...

Answer 8

Thanks for all the details Jason! To get a Blue Ox tow bar to fit with the shackles on your 2021 Jeep Wrangler Sport you'll need either the 7/8" #BX88357 or 1" #BX88358 Adapters, but just be sure to check with the manufacturer of your…

view full answer...

Answer 9

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Availability of Blue Ox D-Ring Adapter that Fits Smittybilt Stryker Bumper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching