See what our Experts say about this Roadmaster Tow Bar Base Plate

• Are There D-Ring Adapters that Work with etrailer brand Tow Bars
  Hey Kenneth,the etrailer tow bars do not have a d-ring adapter solution. We do carry the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Tow Bars - 1" Thick, # RM65FR and # RM-035-1 but these require use of Roadmaster tow bar like the part # RM-520.
  view full answer...
• Will Blue Ox Off-Road Bumper Adapters Fit Smittybilt XRC Gen 2 Bumper on 2009 Jeep Wrangler Rubicon
  Hey Steven! Thanks for the pictures and measurements. It looks like those are 1" wide with a 7/8" hole so the Blue Ox Off-Road Bumper Adapters # BX88357 will fit. The one thing you need to do is make sure that bumper is rated for flat towing. It may be a heavy duty bumper but that doesn't always mean it can be used to tow your vehicle. Do you have the rest of the parts you need for flat towing aside from the tow bar?
  view full answer...
• Part Needed to Connect Roadmaster Tow Bar to 2023 Ford Bronco Badland
  Hey Sean, since we know the 2023 Ford Bronco Badlands has D-rings that are 1 inch thick and that you also have a Roadmaster tow bar the correct base plate kit solution is the Roadmaster part # RM65FR. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that...
  view full answer...
• D-Ring Adapter For A Roadmaster All Terrain Tow Bar
  Hi Merrill! We do have options to adapter your Roadmaster All Terrain tow bar, but the D-rings are going to be the deciding factor. I have the three options listed below: Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick # RM-035 Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1 Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM65FR One thing I do...
  view full answer...
• Which Base Plate Kit Adapter Works with Ford Bronco Badlands Winch Mount
  Hey Jordan, since your D-rings are 1 inch thick the correct D-ring adapter would actually be the part # RM65FR which would require using a Roadmaster tow bar like the # RM-520. The Curt D-ring adapter you mentioned is a lot wider than that so it would not be what you are looking for.
  view full answer...
• Roadmaster 035-G2 Adapters for Use With Blackhawk 2 All-Terrain Tow Bar for Off-Road Bumper
  We do carry the adapters you are looking for so you can tow your Jeep with the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422. The part you need is the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motorhome Mounted Tow Bars - 1" Thick # RM65FR.
  view full answer...
• Tow Bar to Use Adapter for Extended D-Ring Bumper Mounts
  There is one adapter for extra clearance to use on extended D-ring mounts, but it is from Roadmaster and there isn't an option for use with Blue Ox tow bars. So you would need to get a Roadmaster tow bar as well in order to use the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM65FR. This adapter is compatible with the following tow bar options from Roadmaster: - Roadmaster Falcon 2 Tow Bar # RM-520 - Roadmaster Falcon All Terrain, Non-Binding...
  view full answer...
• Is Part Number RM65FR The Same as Roadmaster 0356-G2 D-Ring Adapter
  The Roadmaster # RM65FR is compatible with a Roadmaster tow bar, and is the same part as the Roadmaster 035-G2. It's the same exact part, it just uses our part number. The D-Ring adapter is designed for extra clearance for SmittyBilt Gen 2 bumpers, but you'll want to sure that the bumper is rated for the weight of your vehicle. I've linked to a video showing the adapters being installed.
  view full answer...
• Parts Needed to Flat Tow 2021 Jeep Wrangler With SmittyBilt Gen2 Front Bumper
  We can get you all the parts needed to flat tow your 2021 Jeep Wrangler with a SmittyBilt Gen2 front bumper with 1 inch thick shackle mounts; what you'll need are an adapter that mounts to your bumper, a tow bar, safety chains, wiring, and a braking system. I'll make a list of the exact parts you'll need for your Jeep with the SmittyBilt bumper: - Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM65FR - Roadmaster Falcon All Terrain, Non-Binding Tow...
  view full answer...
• Recommended Tow Bar Compatible With Roadmaster D-Ring Adapter
  The Adapter for Extended D-Ring Bumper Mounts to Roadmaster Tow Bars # RM65FR is only compatible with Roadmaster tow bars like the Falcon 2 # RM-520. There are no D-ring adapters available for the etrailer SD Non-Binding Tow Bar # e34ZR. The Falcon 2 would work well for your application, and would also require safety cables like # RM-643 since they are not included. Also, make sure you verify that your bumper is rated for flat towing. Even though you have D-ring attachments, it is possible...
  view full answer...
• Can Roadmaster Tow Bar Connect to Jeep Wrangler with D-Rings on Off Road Bumper
  Roadmaster has D-Ring adapters for their base plate kits like with the # RM-035 for a 3/4 inch thick D-ring, part # RM65FR for a 1 inch D-ring adapter that is extended or the part # RM-035-1 for a 1 inch thick D-ring standard length. This would work great with any of their coupler mounted base plate kits like the # RM-520.
  view full answer...
• Parts Needed For Flat Towing a 2006 Jeep Wrangler TJ With Smittybilt Front Bumper 76800
  I reached out to Smittybilt and they informed me the tabs on your bumper can be used for flat towing your 2006 Jeep Wrangler TJ. To do this you will simply add the D-Ring Adapter # RM65FR to the Roadmaster Nighthawk All-Terrain Tow Bar # RM-676. Do note the tow bar needs to stay within 3" of level from your receiver to the front of your Jeep. Here is a list of High-Low adapters you may need if your connection points are not within 3" of each other. 4" Rise/Drop # RM-048-4 6" Rise/Drop...
  view full answer...
• Flat Tow Base Plate Kit for 2016 Jeep Wrangler Unlimited With Front Mount Trailer Hitch Receiver
  The Blue Ox Base Plate Kit, # BX1126 for 2016 Jeep Wrangler Unlimited can not be installed simultaneously with a Curt, # 31432 or similar front mount trailer hitch receiver as they each occupy the same space beneath the front of the Jeep. We have been asked this question previously with the goal being to have a front mount hitch for purpose of installing a winch. If this is your objective too, the best option is to replace the front bumper with an aftermarket model that tow rated with...
  view full answer...
• Compatibility of Roadmaster RM65FR D-Ring Adapter for Aftermarket Bumper on 2006 Jeep Wrangler TJ
  The Roadmaster # RM65FR is compatible if the tabs your D-rings attach to are 1 inch thick. The adapter would simply replace the existing ends on your Falcon 2 tow bar. Remove the existing ends, and the adapter slips over the end of the bar and is secured with the included pin. There's one caution you'll need to know about, though. You'll need to make sure that the aftermarket bumper you have is rated for towing the vehicle. Not all bumpers are so rated, so for safety's sake you'll want...
  view full answer...
• Does Roadmaster Blackhawk Tow Bar Work with D-Ring Bumper Adapter RM65FR
  Yes the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM65FR that you referenced is compatible with the Blackhawk 2 All Terrain tow bar part # RM-422.
  view full answer...
• D-Ring Adapter for Flat Towing Jeep Gladiator with Rugged Ridge Arcus Bumper
  If the width of the d-rings on your bumper is 1 inch you'd need the part # RM-035-1 unless you had a Smittybilt bumper that requires the extended part # RM65FR. For a tow vehicle that has air brakes the Air Force One part # SM99243 is the best option still.
  view full answer...
• D-ring Adapter for etrailer XHD Non-Binding Tow Bar
  The etrailer XHD Non-Binding Tow Bar for Duncan Base Plates, # e57ZR does not have an option for adapter for extended D-Ring bumper mounts. We do carry the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Tow Bars - 1" Thick, # RM65FR and # RM-035-1 but these require use of Roadmaster tow bar, not the etrailer XHD Non-Binding Tow Bar.
  view full answer...
• Does Roadmaster D-Ring Adapter work with a Roadmaster Eagle Tow Bar
  Yes the Adapter for Extended D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM65FR would work with your Eagle 8000 Roadmaster tow bar.
  view full answer...
• Does Adapter For Extended D-Ring Bumpers # RM65FR Work with 7/8" Inner Arms?
  Hey Chris, The Adapter for Extended D-ring Bumpers # RM65FR does indeed fit 7/8" diameter arms, but is only designed for Roadmaster tow bars. What tow bar do you have?
  view full answer...

Do you have a question about this Tow Bar Base Plate?