Tailer Hitch Receiver for Removable Rear Fascia and Base Plate On 2020 Jeep Cherokee Trailhawk

Question

Question:

I’m looking for a trailer hitch for a 2020 Jeep trailhawk . One that goes through the bezel not underneath. I know mopar makes one but I want to Oder all my stuff from one place. I also need base plate for front for flat tow blue ox tow bar

asked by: Robert L

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # DT28MR will hide behind the rear fascia of your 2020 Jeep Cherokee Trailhawk. We do have the 4-way Flat Wiring # C56406 which will allow you to connect to most small trailers. If you intend to tow larger trailers you will also need to add the 7-Way # ETBC7 and a Brake Controller # RED52VR.

For the base plate we do have the Blue Ox # BX1143 which you can connect to your Tow Bar # BX7420. You will be able to use the Wiring Kit # BX8848 to integrate the factory turn signals to operate off your motorhome when flat towing.

Please let me know what all other components you may need such as one of our on board braking systems like the Demco Stay-IN-Play DUO # DM86VR or Air Force One # DM26VR.

expert reply by: Bud M

0

Answer 1

While there is one hitch for your 2021 Jeep Cherokee Trailhawk that exits through the bumper, the #e73ZR does not, as the receiver will be below the bumper of your Jeep. The only option for a hitch that protrudes the bumper of your Cherokee Trailhawk…

view full answer...

Answer 2

You're right, Mike, there two different Jeep Cherokees in the videos for the Draw-Tite Max-Frame Trailer Hitch Receiver #75998 and Curt Trailer Hitch Receiver #C13395. We just had different customers come in with a 2020 Jeep Cherokee and one…

view full answer...

Answer 3

Sorry about the confusion. The Curt #C13398 and #C13171 and the etrailer brand #e73ZR would all fit the 2019 Jeep Cherokee Trailhawk. Of the various options, a top choice would be the etrailer #e73ZR because once installed it would be the most…

view full answer...

Answer 4

Though the safety chain loops on the Draw-Tite #DT28MR will be recessed due to where the hitch will sit, they are not inaccessible by any means. This is designed to mimic the look of a factory hitch so it will fit in the area the factory hitch will.…

view full answer...

Answer 5

For your 2019 Jeep Cherokee Trailhawk we have the Draw Tite hitch part #DT28MR which comes through the rear bumper like you are wanting. Then to add a 7-way you'd need to first install a 4-way like with the part #C56406 which you'll later…

view full answer...

Answer 6

For a hitch that fits your 2016 Jeep Cherokee Latitude I recommend the etrailer #e62TR. The #DT28MR you were looking at is only designed to fit Trailhawk models. The etrailer hitch has a concealed cross tube so only the receiver will be visible at…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Tailer Hitch Receiver for Removable Rear Fascia and Base Plate On 2020 Jeep Cherokee Trailhawk

Products Featured in This Question

Continue Researching