Is There A Replacement Manual Overide Rubber Plug For Older RAM Power Tongue Jacks?

Question

Question:

Replacement Manual Override Plug For A 3,500lb RAM Electric Trailer Jack I see the previous answers as Item # EJ-3520-BCP, but that doesnt look quite right, the one I have had, it disintegrated is a rubber thing kind of shaped like an egg. Do you have the a replacement part??

asked by: James

1

Helpful Expert Reply:

I have a suggestion for you as the rubber style plug is obsolete when Ram switched to the new Cover # EJ-3520-BCV style which uses the Cap # EJ-3520-BCP you found. With your cover having the odd egg shape you can enlarge the hole to a round hole which you can fit with a rubber firewall plug that you can source from a local auto parts store. Do be sure to verify sizes available before cutting a hole in your current cover.

expert reply by: Bud M

1

Answer 1

I believe you are referring to the Camco RV Grill Mounting Rail #CAM57268, which is what will permanently install on the wall of your camper/RV to use for an attachment point for the brackets on the Aussie Portable Gas Grill #277-000091 that you were…

view full answer...

Answer 2

If you can reply to this email with the pictures I can help you out. Just be sure to let me know what the product is they are installed on!

view full answer...

Answer 3

The correct manual override cover for your 3,500lb electric Ram jack is the Replacement Manual Override Cap for etrailer A-Frame Electric Jack #EJ-3520-BCP. For a cover you can use the Ultra-Fab Protective Cover for Electric A-Frame Jacks…

view full answer...

Answer 4

When it comes to your 2022 Chevrolet Suburban the Tekonsha Brake Controllers do not have the plug and play adapters for your vehicle. You will have to splice those 4 wires into your Prodigy P3 controller using the Replacement Brake Control Plug-In…

view full answer...

Answer 5

If you take a look at the diagram I've provided for the Replacement Power Switch for RAM Electric Trailer Jack with Footplate #EJ-3520-PSW which goes to the Electric Jack w/ Footplate #EJ-3520-WBX, you'll be able to see how both of the…

view full answer...

Answer 6

Hey Dianne! The Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches item #ERT00108 weighs 35-1/2 lbs. What vehicle are you planning on using these on?

view full answer...

Answer 7

I believe you're looking for the Replacement Manual Override Cap for etrailer A-Frame Electric Jack #EJ-3520-BCP. This will replace the manual override cap on your RAM 3.5K trailer jack, and is black in color.

view full answer...

Answer 8

Hello Nick, thanks for reaching out. The Dutton-Lainson Boat Trailer Jack #DL22335 may work for you. It has 7/16" holes. They are 5-1/2" apart across. There is 2-3/8" between the top hole and the hole under it. Then there is 1"…

view full answer...

Answer 9

Typically, when the outside edges of a tire are showing wear its because the tires are under-inflated. The solution is to inflate the tires to the maximum pressure listed on the sidewall. Now if the outside of tires have what looks like gouges are…

view full answer...

Answer 10

Hello Nathan, thanks for reaching out. You are correct the Fulton XLT #F26ZR will not fit a 3x5 frame. We do have a few jack options in black that will fit a 3x5 frame. Take a look at the following: - Ark Xtreme Off-Road Swivel Trailer Jack w/ 2…

view full answer...

Answer 11

Equal-I-zer uses a 3/4 inch brass washer. We sell the washers along with the spacer rivet as part #EQ95-01-9450. I'd recommend sticking with brass washers if at all possible.

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Is There A Replacement Manual Overide Rubber Plug For Older RAM Power Tongue Jacks?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching