Replacement Brakes, Drums, Hubs & Bearings For Dump Trailer With 10K Dexter Axles Manufactured 2006
Published 09/26/2023
Products Featured in This Question
Question:
I am looking to change the entire brake and hub assembly out on a dual tandem dump trailer with 10k Dexter axles. My drum measures 12-3/16inch inside diameter at the outer rim which faces toward the axle. The outside diameter is around 14. The depth/width of the drum brake shoe contact surface is 3.5. The depth of the drum measured on the outside of the drum is 5. Would this be considered a 12-1/4inch x 5inch drum? I am trying to avoid ordering the wrong assemblies. The brake shoes are 3-1/2inch wide. The markings on the drum are 9-44, WF2, and Maximum Reboar Diameter 12.34. Axle Serial Number 154362566.
asked by: Nathan R
Expert Reply:
Thank you for the serial number as this allows me to confirm all the components installed when the axle was built. For a trailer with 2 of these axles you will need the following components to change out all the parts. The brakes are 12-1/4" x 3-3/8".
Dexter Left Electric Brake # 23-450 Qty 2
Dexter Right Electric Brake # 23-451 Qty 2
Dexter Trailer Brake Drum # 9-44-1 Qty 4
We do have the Dexter Trailer Hub and Drum Assembly # K08-288-90 if you want to replace the entire hub as well as the drum. Here are the bearings and seals used for your hub as well if they need replaced separately.
Inner Bearing # 387A
Inner Race # 382A
Outer Bearing # 25580
Outer Race # 25520
Seal # 10-51
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" - Left Hand - 9K to 10K
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 9000 lbs
- 10000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- Dexter
more information >
Continue Researching
- Search Results: curt 56003
- Search Results: 9~123~1
- Search Results: trailer hubs and drums
- Search Results: hopkins 40955
- Search Results: hopkins plug
- Search Results: hopkins
- Search Results: 40955
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Q&A: How Do I Determine What Electric Brake System Works With My Trailer
- Q&A: Brakes For 10,000lb Dump Trailer 5200lb Double Axles With 12x2 Inch Drum Brakes
- Shop: Dexter Trailer Brake Drum for 10,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Non-ABS
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Trimax Puck Lock for Trailer Door Hasps - 3/8" Shackle - Steel - Chrome
- Q&A: How To Find Correct Replacement Electric Braking Assembly Parts for a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Shop: Suspension Enhancement
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
on Accessories and Parts
