What Bearing Kit and Idler Hub Fit a 2005 EZ Loader Boat Trailer With UFP H-1377 Idler Hubs?
Published 08/04/2023
Products Featured in This Question
Question:
I have a 2005 EZloader boat trailer. I would like to purchase the hub bearing kit or the complete hubs for this trailer. The hub has the following info stamped on the back of the hub : UFP, H-1377, A ZHM could be A 2HM. The diameter of the protector on the outside of the hub is 2.0 inch I believe this indicates a tapered spindle with different size bearings. Let me know if you need additional information. Do you have a complete trailer hub or bearing kit for these trailer hubs ?
asked by: Dave
Expert Reply:
The UFP H-1377 is for a #84 spindle. This will use the Bearing Kit # BK2-100 or the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K if you wish to have a all new hub. I recommend using the Grease # L11390 with the bearings or hub. This grease works great in both hot and cold temps and is water insoluble so it will not absorb water.
Product Page this Question was Asked From
Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: hub dust cover
- Search Results: bearing buddy
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Search Results: trailer leaf springs
- Search Results: st145r12 radial trailer tire
- Search Results: straight tongue trailer coupler
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Q&A: Availability of Grease Cap for 2.3125 Inch Hub Bore Diameter
- Shop: Bearing Buddy Bearing Protectors - Model 2328 - Chrome Plated - Qty 2
- Shop: Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149
- Shop: Timken 473336 Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/4" - Dacromet
- Q&A: Idler Hub To Replace TDE 46245 Hub and Rotor On Boat Trailer
- Q&A: Replacement Rotor With Hub For 2008 Tahoe Boat Trailer Q5SA
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Video: Installing the etrailer Easy Grease Trailer Idler Hub Assembly
- Q&A: Replacement Leaf Springs For A 2014 Trail Star Boat Trailer
- Search Results: axle castle nut
- Video: A Closer Look at the Replacement Grease Zerk for Lippert Super-Lube Axle Spindles
- Video: The Low-Down on the Roadmaster Rollaway Trailer Hitch Protector
- Search Results: galvanized leaf springs
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Trailer Bearings Races Seals Caps
