Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
Updated 12/31/2020 | Published 12/30/2020
Products Featured in This Question
Question:
looking for replacement hub and bearing for # IDE 46245 min-thk 850IN
asked by: MATT
Expert Reply:
I believe you meant a TDE 46245, is that correct?
If that's the case, you've got a 3500 lb axle which uses a 10 inch hub/rotor with a 5 on 4-1/2 wheel bolt pattern. You'll want to use the Kodiak # KHR10D hub/rotor as a replacement. The hub has a 21.6mm or .850 inch minimum thickness. The hub/rotor is Dacromet plated which provides excellent corrosion resistance that is ideal for marine use.
For the replacement bearing kit, use # BK2-100 which includes the L44649 outer bearing, the L68149 inner bearing, the L44610 outer race, the L68111 inner race and the 10-19 grease seal with a 1.719 inner and a 2.565 inch outer diameter. The tang washer and cotter pin are also included.
Product Page this Question was Asked From
Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Lippert Spindle Nut Kit w/ D-Flat and Tang Washers - For 2,200-lb to 4,400-lb Axles
- Search Results: d washer
- Search Results: trailer bearings races seals caps
- Search Results: spindle wear ring
- Search Results: axle nuts
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Search Results: l68149
- Search Results: gs~1719
- Search Results: l44649
- Q&A: Idler Hub To Replace TDE 46245 Hub and Rotor On Boat Trailer
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Replacement Mounting Bracket for Lippert Disc Brake Caliper - 3,500-lb Axles - 4-Bolt Pattern
- Q&A: How To Find Correct Replacement Disc Brake Pads for TDE 46245
- Video: Hands-On with the etrailer Hub Bearing Kit
- Q&A: Can Kodiak Hub # KHR10D Replace Trailer Hub TDE 46245
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Video: Review of Kenda Trailer Tires and Wheels - Karrier KR35 ST205/75R14 Radial White Aluminum - KE29TJ
- Q&A: Replacement Disc Brake Trailer Hub With Rotor And Bearing Kit To Replace TRE 46245
- Q&A: Replacement Disc Brake Kit For Homemade Boat Trailer and TDE 46245 Rotors
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: Can I Replace Factory Trailer Brake Controller with an Aftermarket on a 2009 Chevy Silverado
- Video: Comprehensive Review: Kodiak Disc Brake Kit-K2HR35D
- Video: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles: The Breakdown
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Video: All You Need to Know About the Grease Cap, 1.99" OD EZ Lube Drive in with Plug
- Video: All You Need to Know About the Kodiak Disc Brakes
on Trailer Hubs and Drums
