What Position Should The Converter # PD4045CSV Be Switched To For Charging AGM Batteries?

Question

Question:

Is there anything special you need to do to charge an AGM type battery when installing the PD4045CSV replacement inverter in a 4045KA? I see you can either LI Lithium or LA lead acid charge, do I just leave it on LA for AGM battery?

asked by: Eric

0

Expert Reply:

You will leave the switch on the Replacement Converter Section # PD4045CSV set to LA for lead acid battery. An AGM Battery # 34276285 has a lead acid construction with fiberglass mats to keep acid absorbed between the lead plates.

expert reply by: Bud M

0

Answer 1

Hi Lou; the MaxxAir FanMate RV and Trailer Roof Vent Cover is the best fit for your #MA00-04500K. The following colors are available: -MaxxAir FanMate RV and Trailer Roof Vent Cover - Smoke #MA00-955003 -MaxxAir FanMate RV and Trailer Roof Vent Cover…

view full answer...

Answer 2

Hey Charlie, the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote #MA00-04500K is what I recommend for a roof vent that is quiet and has a rain sensor like you are looking for. Then for a manual lift roof vent the MaxxFan Roof Vent part…

view full answer...

Answer 3

Your Interstate battery is a group 27 size battery. I recommend going with either an AGM #34276285 or Lithium #GP99QR battery. Your Interstate is a typical lead acid battery which requires you to check the battery acid and water mixture and refill…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 11

Hello Joe, Thank you for reaching out! The Power Mountain Tallboy Off-Road Bottle Jack - 11-5/16" to 27-1/16" Lift - 12 Tons #PM94FR does have the capacity you’d need, but since your fifth wheel’s frame sits about 25" off the ground,…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

What Position Should The Converter # PD4045CSV Be Switched To For Charging AGM Batteries?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching