Roof Vent Cover for MaxxFan Plus Roof Vent

Question

Question:

What size hood fits on a max fan plus model 00-04500k.

asked by: Lou

0

Expert Reply:

Hi Lou; the MaxxAir FanMate RV and Trailer Roof Vent Cover is the best fit for your # MA00-04500K. The following colors are available:

-MaxxAir FanMate RV and Trailer Roof Vent Cover - Smoke # MA00-955003

-MaxxAir FanMate RV and Trailer Roof Vent Cover - White # MA00-955001

-MaxxAir FanMate RV and Trailer Roof Vent Cover - Black # MA00-955002

These are specifically designed to fit MaxxFan Plus roof vents like yours and come with a 6-year warranty.

expert reply by: Robin H

0

John

9/30/2025

I purchased the MA00-955002 but it didn't allow the fan vent to fully open. I returned it. Does the NA00-933083MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Black Part Number: MA86JR allow the fan to fully open?

Robin H.

10/1/2025

@John none of them will but you will still get maximum air flow.

John

10/1/2025

@RobinH Won't it hurt the motor that lifts the lid? I read other places the life of the lift motor is shortened.

Robin H.

10/1/2025

@John it has a sensor that stops it from opening any further when there is an obstruction, like a vent cover, so it won't wear out the motor.

Answer 1

Hey Steve, congrats on the new truck. Since your 2026 Ram 3500 has the factory puck system, you'll want the PullRite SuperGlide 5th Wheel Hitch item #PUL28RR. The PullRite SuperGlide 5th Wheel Hitch item #PUL28RR has a 24,000 lbs capacity and…

view full answer...

Answer 2

Hey Charlie, the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote #MA00-04500K is what I recommend for a roof vent that is quiet and has a rain sensor like you are looking for. Then for a manual lift roof vent the MaxxFan Roof Vent part…

view full answer...

Answer 3

Your Interstate battery is a group 27 size battery. I recommend going with either an AGM #34276285 or Lithium #GP99QR battery. Your Interstate is a typical lead acid battery which requires you to check the battery acid and water mixture and refill…

view full answer...

Answer 4

You will leave the switch on the Replacement Converter Section #PD4045CSV set to LA for lead acid battery. An AGM Battery #34276285 has a lead acid construction with fiberglass mats to keep acid absorbed between the lead plates.

view full answer...

Answer 5

The MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955002 will fit your MaxxAir 00-04900K, but it will not allow the lid to fully open. This is a clearance issue that is the same for every other RV roof vent on the market. Manufacturers will…

view full answer...

Answer 6

The tallest roof vent cover we offer in white is going to be the MaxxAir FanMate RV and Trailer Roof Vent Cover part #MA00-955001 which is about 10-1/4" at its highest point. I will say that most of the auto-open roof vents will stop raising…

view full answer...

Answer 7

Hey Justin, yes the MaxxAir FanMate RV and Trailer Roof Vent Cover #MA00-955002 will work with the MaxxAir 4 speed fan setup you have now. This was designed to fit the Maxxair vents and the clip system would work without any type of modification.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Roof Vent Cover for MaxxFan Plus Roof Vent

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching