Recommended Sliding 5th Wheel Hitch for a 2026 Ram 3500 Maga Cab w/ the Puck System

Updated 01/27/2026 | Published 01/23/2026

Products Featured in This Question

PullRite SuperGlide 5th Wheel Hitch for Ram Factory Prep Package - 24K

(76)

$2505.00

Question:

I have a 2026 Ram 3500 Maga cab with the puck system that has the 39 x 30.375 or 30 3/8 dimensions, what part number do I need? Looking for the 2300 slider series.

asked by: Steve

Expert Reply:

Hey Steve, congrats on the new truck. Since your 2026 Ram 3500 has the factory puck system, you'll want the PullRite SuperGlide 5th Wheel Hitch item # PUL28RR.

The PullRite SuperGlide 5th Wheel Hitch item # PUL28RR has a 24,000 lbs capacity and will give you up to 18" of travel for making tight turns and backing. The base includes four legs that are going to drop right down into the factory pucks built into your Ram's bed.

What kind of pinbox does your 5th wheel trailer have?

You can add this information, along with any other questions you have, where it says Add Comment.

expert reply by: Jerred H

PUL28RR
(click to enlarge)

Steve

1/26/2026

My problem is that part number coincides with the puck system that measures 39 x 22.6, or is it adjustable to work for both sizes again I have the puck system that measures 39 x 30.325. Is there a diagram of the puck placements? We have the Rhino pin box. Thanks in advance

Jerred H.

1/26/2026

@Steve The PullRite SuperGlide 5th Wheel Hitch item # PUL28RR fits the Ram factory puck system. The Ram factory puck pattern has stayed the same since 2013 when it was introduced. From center to center it measures 39" from left to right horizontally and 30-3/8" vertically from the pucks closest to the cab to the pucks closest to the bed. There's no factory puck system that measures 39" x 22.6" So long as the skid plate on your Rhino Pinbox is 7-3/8" wide you'll need the PullRite SuperGlide Quick Connect Capture Plate for 73/8 Lippert Rhino Box Pin Boxes item # PUL44ZR.

Mark

1/27/2026

I like the Pullrite Super Glide. It’s fits my 2020 and 2026 Ram 3500 perfectly. The 2026 is a long bed and I like the extra room since the slide gives me even more turning radius on the long bed. Just make sure you get the correct capture plate for your pin box.

Jerred H.

1/27/2026

@Mark Thanks for the feedback Mark! Glad you're enjoying the hitch!

Tom

1/27/2026

HI Steve: I ordered the Pullrite 5th wheel slider hitch model 2300 with the puck system for my 2024 RAM 2500 short bed. It's heavy, but I have an electric pulley on the ceiling in my garage, so it was easy for me to install. Also, the directions made it easy to assemble prior to installation. The pucks fit perfectly in my factory prepared truck bed. I've used the hitch a number of times and it works great. I had a Pullrite hitch previously with a different truck, so I was dead set on getting the same brand for my new truck. Also, my son-in-law purchased one for his GMC 3500 and is very happy with it as well. Tom