Recommended Suspension Enhancement for a 4WD 2023 Chevy Colorado

Question

Question:

I have a 2023 Colorado 4WD. I am looking for some extra support in the rear end but do not want it to change how the suspension feels. I don't tow much so I don't want something that changes the ride in my truck 24/7. Is this even possible?

asked by: Vinny

0

Expert Reply:

Yes, it is possible and I have a great suspension upgrade for your 2023 Chevy Colorado. I recommend the SumoSprings Solo Custom Helper Springs item # SS37PV. These helper springs replace your rear bump stops and will provide you with an additional 1,800 lbs of support.

SumoSprings work off a system called progressive load control. This means that the heavier the weight is on the rear of your truck the more the springs will engage. If you're weighing down the back of your truck you won't even feel these.

I have linked the installation instructions below.

The item # SS37PV system will not fit the diesel Colorado's. If your truck is a diesel you will need item # SS75FR.

expert reply by: Jerred H

0

Answer 1

We have a couple of options to add a set of SumoSprings to your 2023 Chevy Colorado. If you have a Colorado with a gasoline engine you will need item #SS57PV. These fit both the 2WD and 4WD models and have a 1,400 lbs capacity. If your Chevy Colorado…

view full answer...

Answer 2

I can definitely shed some light on the confusion. While the SumoSprings Solo Custom Helper Springs - Rear Axle #SS85FR and the #SSR-212-40 seem to be exactly identical other than the color, they actually have different-shaped mounting brackets on…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 7

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 8

Hey Timothy! I’m sorry to hear your etrailer 60x24 Folding Cargo Carrier #e98874 is already starting to show some rust. Living near the ocean is definitely tough on exposed steel, even with a protective powder coat. The Benton MoveHitch 60x24 Cargo…

view full answer...

Answer 9

Hey Neal! You can use the standard 5/8" Hitch Pin and Clip #e47RV for quicker installation and removal, or the Locking Hitch Pin #e98882 if you want to keep the carrier secured to the vehicle. Either way, you will lose the built-in anti-rattle…

view full answer...

Answer 10

Hi Shannon! The WeatherTech Mud Flaps #WT58WF you purchased are the correct fit for your 2024 Chevy Colorado Trail Boss with the factory fender flares. Unfortunately, we haven't had a Colorado with the factory flares come through our shop for an…

view full answer...

Answer 11

Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…

view full answer...

Answer 12

Hey Doyle, welcome back! The push-button mechanism on the Benton MoveHitch Cargo Carrier #B86VR and #B38VR (with cargo net) is very reliable and has been thoroughly tested. It is actually one of the best features of the MoveHitch since it makes it…

view full answer...

Recommended Suspension Enhancement for a 4WD 2023 Chevy Colorado

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching