Replacement Lid For A MaxxAir MaxxFan 4751KS

Question

Question:

We just had a bad hail storm and the cover for our 4751ks vent fan broke. Do you have some kind of replacement that will work? Thanks

asked by: Wayne M

0

Expert Reply:

The correct replacement lid for MaxxFan 4751ks is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part # MA10A40009K for black or part # MA10A40002K for white.

expert reply by: Kevin C

0

Answer 1

E-track can be driven over and it will be fine. It would not collapse or otherwise damage itself. You could use and drive over the Erickson Horizontal E-Track #EM19147. Then for a wheel strap the Erickson E-Track Wheel Tie-Down Strap with Roller…

view full answer...

Answer 2

Hey Bruce, we do have the replacement Tireminder sensors you are looking for with the part #TM-2Brass for if your valve stems are brass or the part #TM-2ALUM if they are aluminum. How do you like the TPMS system aside from the two sensors not working…

view full answer...

Answer 3

Thanks for the information Jesse and welcome back! We have two options to replace the vent cover on your MaxxAir MaxxFan Model 4700G vent. They are the Replacement Lid item #MA10A40002K in white or item #MA10A40009K in black/smoke. I recommend going…

view full answer...

Answer 4

I really wish there was an easy answer as to a safe track spacing with the Erickson E-Tracks #EM59150 to accommodate most vehicles, but the truth is that there are just too many possible widths to comfortably answer this without actually figuring out…

view full answer...

Answer 5

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 6

The Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is meant to be a direct replacement however not all the necessary hardware is included. The remaining items you'll need is the Key Wall Control part #MA00A03550K,…

view full answer...

Answer 7

Hey Paul, yes we do. You can use the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX to replace your current fan and will work with your original controller and garnish.

view full answer...

Answer 8

You reported that you cannot use the remote on your MaxxFan 4700K to put the vent cover up and down. Let's troubleshoot. Put some new batteries in your remote. Ensure that the display comes on. Verify if your vent cover now works. Verify if other…

view full answer...

Answer 9

Thanks for the information Eric! To replace a single wet bolt in your 2019 Grand Design Reflection 312BHTS suspension you'll need the Step Wet Bolt for 1-3/4" Double Eye Springs item #34007-187-00. This is an exact replacement for the step…

view full answer...

Answer 10

Hi James, I'm really sorry to tell you, but the MaxxFan Plus part #MA00-04751KSX will not work with a wireless remote. The MaxxFan Plus part #MA00-04751KSX is a direct replacement for the MaxxFan Plus original model 00-04751KS and is intended to…

view full answer...

Replacement Lid For A MaxxAir MaxxFan 4751KS

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching