Can I Use a Wireless Remote for the MaxxFan Plus part # MA00-04751KSX?

Question

Question:

Can I get a wireless remote for the Maxxfan I bought from you? MA00-04751KSX It’s installed, but no com wires are installed, and no way to do it at this point. Please tell me this fan will work with a wireless remote ????????

asked by: James K

0

Expert Reply:

Hi James,

I'm really sorry to tell you, but the MaxxFan Plus part # MA00-04751KSX will not work with a wireless remote.

The MaxxFan Plus part # MA00-04751KSX is a direct replacement for the MaxxFan Plus original model 00-04751KS and is intended to work with the existing wall mounted controller part # MA00A03550K. To get a roof vent that has a wireless remote you need the MaxxFan Plus part # MA00-04500K. I know you've just replaced your old unit so it's totally understandable not wanting to purchase and install another new one.

Are you able to run wires to install the wall mounted controller so you can operate it?

expert reply by: Claire H

0

Answer 1

Hello again Thomas! The #MA00-04751KSX does indeed need to be a wired to a wall control for it to work. It's really used as a replacement or upgrade to a pre-existing damaged or worn out unit. I believe what you are looking for is the MaxxFan…

view full answer...

Answer 2

Hi Steve; does your wall switch look like the #MA00A03550K? The Replacement MaxxFan Plus 4-Speed Roof Vent #MA00-04751KSX is designed to replace the 00-04751KS which works with this wired wall controller. If you have this switch, or the older model…

view full answer...

Answer 3

No, I do not Ralph. What model Maxxair vent fan do you have and what part are you needing to replace? You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.

view full answer...

Answer 4

Hey Devon, does your RV roof vent wall control unit look like the #MA59FR? If so you have a MaxxFan Plus RV roof vent that was designed for wall control and for a replacement unit you would want the part #MA00-04500K to use a setup that would use…

view full answer...

Answer 5

Hey Jay! The MaxxFan Plus 4-Speed Roof Vent #MA00-04751KSX does not come with a wall controller but it is compatible with one. You will have to pick up the Replacement Key Wall Control For MaxxFan Plus and Deluxe #MA00A03550K separately.

view full answer...

Answer 6

The MaxxAir MaxxFan Plus Roof Vent part #MA00-04751KSX is designed to replace an existing roof vent fan. Therefore, it does not come with everything needed for installation. The extra items you will need are as follows: Key Wall Control part…

view full answer...

Answer 7

There is not a direct replacement for a Truma DLE60C water heater, but you can simply use one that fits in the same cut out. From what I could find, that Truma fits a cut out measuring 12.8" wide x 12.8" high x 19.7" deep, so for…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Can I Use a Wireless Remote for the MaxxFan Plus part # MA00-04751KSX?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching