Height of SumoSprings Helper Springs For 2023 Chevy Colorado & GMC Canyon

Question

Question:

what are the damentions of these, height is all i need to know. thank you

asked by: Chad G

1

Helpful Expert Reply:

I checked directly with the manufacturer for you, and as you can see by the accompanying photo, the height is 5 inches for the SumoSprings Solo Custom Helper Springs # SS85FR.

expert reply by: Kyle S

1

Height of SumoSprings Solo Custom Helper Springs SS85FR
(click to enlarge)

Answer 1

I can definitely shed some light on the confusion. While the SumoSprings Solo Custom Helper Springs - Rear Axle #SS85FR and the #SSR-212-40 seem to be exactly identical other than the color, they actually have different-shaped mounting brackets on…

view full answer...

Answer 2

Hi Jason! We do indeed have an air bag option for your 2020 Chevy Colorado with the ZR2 package. Check out the Air Lift Ride Control Air Helper Springs - Rear Axle #AL59533. The only option this will not fit is the diesel, so as long you have the gas…

view full answer...

Answer 3

We have a couple of options to add a set of SumoSprings to your 2023 Chevy Colorado. If you have a Colorado with a gasoline engine you will need item #SS57PV. These fit both the 2WD and 4WD models and have a 1,400 lbs capacity. If your Chevy Colorado…

view full answer...

Answer 4

Hi Corey; the Ultra-Fab Steel Roller #UF48-979020 is designed to fit a 2" receiver. As long as you have a hitch with a 2" receiver on your 2021 Ford Transit it will fit. What do you typically carry on the back of your Transit?

view full answer...

Answer 5

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 6

Yes, it is possible and I have a great suspension upgrade for your 2023 Chevy Colorado. I recommend the SumoSprings Solo Custom Helper Springs item #SS37PV. These helper springs replace your rear bump stops and will provide you with an additional…

view full answer...

Answer 7

We have found that it varies a little bit between vehicles. For some vehicles the unloaded ride quality is totally unaffected with the Timbrens. Typically this is on higher capacity vehicles where the suspension is already pretty stiff and…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Height of SumoSprings Helper Springs For 2023 Chevy Colorado & GMC Canyon

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching