Recommended Replacement Hubs, Bearings, And Grease Seals For A 2,200lb BTR Spindle
Updated 06/08/2023 | Published 04/24/2023
Products Featured in This Question
Question:
My trailer has a straight 1.06" diameter shaft. From the shaft shoulder to the tip of the threads is 4.25". 5 lug 13" tire on 5 on 4.5 rims. I'm guessing fully loaded 2200 lbs? I can't do high end hubs so middle of the road will have to do.
asked by: Steven B
Expert Reply:
Given the information you've provided the best option is going to be the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized # 8-258-50UC1. This hub is going to come with the inner bearing # L44649 and race, outer bearing # L44649 and race, grease seal, grease cap, and galvanized lug nuts included so that you won't have to purchase them separately. The only thing you'll need to purchase separately is some marine grease # L74FR to pack your bearings and lube the spindle.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: led boat trailer lights
- Search Results: led boat trailer tail lights
- Search Results: trailer tire monitor
- Search Results: boat trailer winch strap
- Search Results: marine grease
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Video: Ultimate Overview of the Optronics LED Combination Trailer Tail Lights
- Video: Hand Winch Strap with Safety Hook, 2" Wide x 25' Long Review
- Video: Hand Winch Strap with Safety Hook, 2" Wide x 25' Long Spec Review
- Video: Review of the Optronics LED Combination Trailer Tail Lights
- Q&A: Disc Brake Kit With 10 Inch Rotors For Salt Water Use
- Shop: Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 25' Long - 4,000 lbs.
- Shop: Mystik JT-6 High Performance Synthetic Grease - 1 Lb Can
- Video: The Low-Down on the Mystik JT-6 High Performace Synthetic Grease
- Video: Detailed Breakdown of the Kodiak Disc Brake Kit
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Video: Feature Review Dexter DX7.5 Drop-N-Go Brake Actuator
- Shop: Dielectric Grease for Electrical Connectors, 2 oz.
- Search Results: trailer hub
- Search Results: bearing race tool
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Trailer Hub that Fits Axle with 2,200 lb Capacity with 5 on 4-1/2 inch Bolt Pattern
- Q&A: Replacement Hub for 1989 Ranger Trailer
- Q&A: Replacement Hub and Bearings for 1989 Tracker Boat Trailer
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
on Trailer Hubs and Drums
