High Capacity Trailer Hitch that Fits 2018 Forest River Georgetown 31L5

Question

Question:

Does this hitch fit the same holes used for the factory installed hitch of a 2018 Forest River Georgetown GT5 31L5?

asked by: Kieth B

0

Expert Reply:

The Curt hitch part # C15400 that you referenced is a confirmed fit for your 2018 Forest River Georgetown GT5 31L5 but it does require drilling which means it does not line up with any current holes on the frame. There aren't any other hitches out there that are going to fit without drilling though so this is still a really great high capacity hitch option.

expert reply by: Jameson C

0

Answer 1

For your 2007 Dodge RAM 3500 HD Flat Bed Crew Cab with dually chassis there is not a B&W trailer hitch receiver available. Instead, I recommend you use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #41936…

view full answer...

Answer 2

When it comes to installing a trailer hitch on your 2014 Ram 3500 The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2 inch #15400 is confirmed to fit your 2014 Ram 3500. The Curt Hitch #C15409 is not confirmed to fit your vehicle. This hich…

view full answer...

Answer 3

Draw-Tite custom-fit Class V hitch #41947, which fits trucks with an outside-to-outside frame width of 34-inches, can be installed at any of three heights, thanks to the multiple holes in the two frame brackets. I can give you these heights…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #C15410 is 37" wide and the bolt hole slots are 34-1/4" on center from drivers side frame rail to passenger side frame rail.

view full answer...

Answer 5

Hello Thomas. In regards to the Curt #C15400 hitch, the total drop from the mounting hole to the top of the receiver tube is 6-1/2".

view full answer...

Answer 6

Yes, the B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25124 is a confirmed fit for your 1992 Chevrolet C/K Series Pickup as long as you have a factory rear bumper. Depending on your intended uses for the trailer hitch receiver, I recommend…

view full answer...

Answer 7

I recommend a Class V hitch for your Gulfstream that is based on a 1999 Ford F-450 cab-and-chassis. These are available in both 2-inch and 2-1/2-inch receiver sizes and in tow ratings up to 20K. All can be seen on the linked page. All require…

view full answer...

Answer 8

Both the Draw-Tite Ultra Frame Trailer Hitch Receiver #41947 and Draw-Tite Ultra Frame Trailer Hitch Receiver #41938 are a confirmed fit for you 1969 Chevrolet K10 as long as you have an 8 Foot bed and both options will require some drilling for the…

view full answer...

Answer 9

The horizontal mounting plate that mounts to the frame of your vehicle on the #41947 is 2-13/16" wide and the mounting plates themselves are 11-9/16" tall. The holes on the horizontal mounting plates are 3/4" and 1-1/4" in…

view full answer...

Answer 10

The available trailer hitches designed for use on RVs are not rated high enough to be considered Class IV or V hitches. So what you will need is to install a heavy duty truck hitch. We have several options, see link, depending on the frame width on…

view full answer...

Answer 11

I can help you find a hitch that will fit your 34 inch outside to outside measurement on your 2016 Chevy 3500 HD. It sounds like you have a Cab and Chassis style Chevy, because of the 34 inch wide outside to outside frame. I have listed the trailer…

view full answer...

Answer 12

From the top of the mounting plates to the top of the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25124 receiver is a 5-1/4" drop and then from the rearmost bolt hole to the end of the receiver is 10-7/8" (see attached).

view full answer...

High Capacity Trailer Hitch that Fits 2018 Forest River Georgetown 31L5

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching