Receiver Tube Height for Draw-Tite Custom-Fit Class V hitch 41947 on 1997 GMC K3500

Question

Question:

What is the height of the hitch from the top of the bracket to the bottom of the receiver? I need it to fit in an opening that starts at 3inch from the frame and stops at 7inch from the frame.

asked by: Nick R

0

Expert Reply:

Draw-Tite custom-fit Class V hitch # 41947, which fits trucks with an outside-to-outside frame width of 34-inches, can be installed at any of three heights, thanks to the multiple holes in the two frame brackets.

I can give you these heights referenced to the bottom of the frame rails. The TOP of the receiver tube will sit below the bottom of the frame any of these three distances: 6-5/8-inches, 8-1/4-inches or 10-1/4-inches. The written instructions are linked for you; these list the tools required for installation.

expert reply by: Adam R

0

click to enlarge

Answer 1

A standard bumper looks like a regular old bumper that goes straight across at the top and bottom and might have a cut out in the center for a license plate but the cutout does not drop below the bottom of the bumper. A deep drop bumper will have the…

view full answer...

Answer 2

For your 2007 Dodge RAM 3500 HD Flat Bed Crew Cab with dually chassis there is not a B&W trailer hitch receiver available. Instead, I recommend you use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #41936…

view full answer...

Answer 3

Both the Draw-Tite Ultra Frame Trailer Hitch Receiver #41947 and Draw-Tite Ultra Frame Trailer Hitch Receiver #41938 are a confirmed fit for you 1969 Chevrolet K10 as long as you have an 8 Foot bed and both options will require some drilling for the…

view full answer...

Answer 4

I would be happy to! It sounds like your 2018 Ram 3500 is the cab and chassis model. To add a hitch to it you will want the Curt Trailer Hitch Receiver item #C15800 for a 2-1/2" receiver or item #C15400 for a 2" receiver. Both of these…

view full answer...

Answer 5

Hello Thomas. In regards to the Curt #C15400 hitch, the total drop from the mounting hole to the top of the receiver tube is 6-1/2".

view full answer...

Answer 6

If the Draw Tite hitch part #41952 has the correct mounting hole dimensions needed for your 2004 IC CE200 bus then there's no reason it wouldn't fit.

view full answer...

Answer 7

The linked instructions for the custom-fit Draw-Tite Ultra-Frame Class V hitch #41947 show specific height dimensions from the bottom of the vehicle frame down to the top of the hitch receiver tube. The adjustable side brackets can place the receiver…

view full answer...

Answer 8

The horizontal mounting plate that mounts to the frame of your vehicle on the #41947 is 2-13/16" wide and the mounting plates themselves are 11-9/16" tall. The holes on the horizontal mounting plates are 3/4" and 1-1/4" in…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver part #C15400 and the Curt Trailer Hitch Receiver part #C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional drawing…

view full answer...

Answer 10

I can help you find a hitch that will fit your 34 inch outside to outside measurement on your 2016 Chevy 3500 HD. It sounds like you have a Cab and Chassis style Chevy, because of the 34 inch wide outside to outside frame. I have listed the trailer…

view full answer...

Answer 11

We have a hitch option for your 2006 Itasca Suncruiser, but the #C15400 is 32.94" wide overall and the bolt holes are 30.31" apart from each other. So what you will need is a universal weld-on hitch, which will fit so long as the frame on…

view full answer...

Answer 12

I spoke with my contact at B and W and he informed me that the center section of the B and W Hitch part #BWHDRH25124 measures 31-13/16 inches long measured from outside of flange to outside of flange.

view full answer...

Receiver Tube Height for Draw-Tite Custom-Fit Class V hitch 41947 on 1997 GMC K3500

Continue Researching