Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"

See what our Experts say about this CURT Trailer Hitch

• Will Curt Trailer Hitch Fit 2016 Chevy Silverado 3500 Cab & Chassis Without Factory Bumper
  Yes it will; a factory bumper is not needed for your 2016 Chevy Silverado 3500 cab and chassis in order to use the Curt Trailer Hitch Receiver # C15400.
  view full answer...
• High Capacity Trailer Hitch that Fits 2018 Forest River Georgetown 31L5
  The Curt hitch part # C15400 that you referenced is a confirmed fit for your 2018 Forest River Georgetown GT5 31L5 but it does require drilling which means it does not line up with any current holes on the frame. There aren't any other hitches out there that are going to fit without drilling though so this is still a really great high capacity hitch option.
  view full answer...
• Hitch Recommendation for a 2006 Ford F-350 Cab and Chassis with Utility Bed
  Since your truck frame is 34 inches from outside to outside that means that it originally was a cab and chassis truck. I have a solution for you, but it will require you drill some holes in the frame. The Curt hitch part # C15400 has a drop of 6-1/4 inches from the mounting surface, but since it was designed to bolt up to a Chevy truck the install holes won't match up. But you can easily drill new ones to match the hitch. The mounting holes are Rear most mounting holes are 30.12 inches Middle...
  view full answer...
• Heavy Duty Trailer Hitch Receiver for 2019 Ram 3500 Cab and Chassis
  There is a great option for a heavy duty trailer hitch receiver that fits a 2019 Ram 3500 Cab and Chassis, the Curt Trailer Hitch Receiver # C15400. This behemoth of a hitch is a Class V with a 2 inch receiver and has a 2,550 lb tongue weight capacity along with a 17,000 lb towing capacity. This hitch is designed to fit so long as your '19 Ram 3500 has a frame that is 34 inches outside to outside and I have added a link to a video install as well as the written instructions for you to...
  view full answer...
• Does Curt Hitch # C15400 Fit 2019 Ram 3500 Cab and Chassis
  The Curt hitch part # C15400 that you referenced does fit your 2019 Ram 3500 Cab and Chassis.
  view full answer...
• Does the Curt Trailer Hitch Receiver Fit a 2022 Jayco Seneca 37K Motorhome?
  Sorry to hear about the trouble you're having, but I did go ahead and confirm that the Curt Trailer Hitch Receiver # C15400 will fit your 2022 Jayco Seneca 37K Motorhome. This hitch is not universal and it is a custom fit hitch, so you can expect this to be an easy bolt-on install using existing frame holes. Also, this hitch does have a pretty beefy weight capacity at 17,000-lbs, with a maximum tongue weight capacity of 2,500-lbs so you'll want to reference your owner's manual first...
  view full answer...
• How Far Out Will Curt 15400 Extend on 2023 Ram 3500 Cab and Chassis
  I can tell you how far the Curt # C15400 extends out from the frame and you can use that to determine the measurement to the end of the service body. We don't have information on the RKI S6080 or a way to determine that distance otherwise. The edge of the mounting plate lines up almost exactly with the rear edge of the frame when the hitch is installed. The distance from this edge to the end of the receiver is 7". You will need to measure 7" from the end of the frame where the hitch would...
  view full answer...
  
• Trailer Hitch for 2019 Ram 5500
  We do have a Class V that fits the 2019 Ram 5500 but the Curt hitch part # C15800 is not a fit. I confirmed with Curt that the Class V hitch receiver part # C15400 fits the 2019 Ram 5500. The Curt Hitch Receiver part # C15400 can handle up to 2550 lbs of tongue weight and the installation does not require drilling. It is designed for a cab chassis model that has a 34 inch frame outside to outside. I have attached a video of the installation process.
  view full answer...
• Class V Trailer Hitch for 2018 Chevy Silverado 3500 Cab/Chassis Truck
  Because Cab/Chassis trucks have a narrower 34 inch frame width than the pickup, the Curt # C15860 Class V hitch won't fit your truck, as it'd designed for the wider frame member spacing of the pickup. We do have a Class V option that will work for you, though. The highest capacity Class V hitch we offer for the cab/chassis model is the Curt # C15400 which has a 17K towing/2550 lb tongue weight capacity.
  view full answer...
• Comparing the Curt Trailer Hitch Receiver Part # C15800 and C15400
  The Curt Trailer Hitch Receiver part # C15400 and the Curt Trailer Hitch Receiver part # C15800 are the exact same trailer hitch save for one has a 2" receiver tube opening and the other a 2-1/2" receiver tube opening. The dimensional drawing that I have attached for you is accurate for both trailer hitch receivers. They will both line up with the frame on a 2008 Chevrolet Silverado 3500HD Cab and Chassis but you will need to make sure the receiver tube opening does not interfere with the...
  view full answer...
  
• How Does a Curt Trailer Hitch Install on a 2012 Dodge Ram 4500 Cab and Chassis
  In order to install Curt trailer hitch # C15800 on your 2012 Dodge Ram 4500 cab and chassis model you will have to drill into the frame because, like you have said, there are no holes in the frame already. The rivet that is in the rear most part of the frame also will come out and get replaced by a bolt. Installation is very similar to hitch # C15400 (just the capacities are different) and I have linked the instructions for it for you to view. The hitches install with 3 bolts on each...
  view full answer...
  
• Trailer Hitch that Fits 2000 Chevy C/K with 34 inch Wide Trailer Frame
  Based on the frame dimension you listed of 34 inches that would indicate that you have a cab and chassis model 2000 Chevy C/K truck. So instead you'd want the part # C15400 which is correct for your frame width.
  view full answer...
• Recommended Hitch For A 2014 Ram 3500
  When it comes to installing a trailer hitch on your 2014 Ram 3500 The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2 inch # 15400 is confirmed to fit your 2014 Ram 3500. The Curt Hitch # C15409 is not confirmed to fit your vehicle. This hich has a bolt-on installation with no welding required. It has a black powder coat finish over a protective base coat that offers a superior rust resistance. I attached a picture of the measurements of the hitch down below.
  view full answer...
  
• Trailer Hitch Receiver For 2000 Chevy C3500 Cab & Chassis That Does Not Require Drilling
  There is a one option for a hitch that fits your 2000 Chevy C3500 cab and chassis that does not require drilling, made by Curt: - Curt 3-Piece Trailer Hitch Receiver # C15511 The # C15511 does not require any welding either, and uses the frame holes that you mentioned.
  view full answer...
• What Heavy Duty Hitch with 2" Receiver is Available for a 2020 GMC Sierra 3500
  I have a solution for you but the # BWHDRH25198 is not going to fit on the 2020 GM Sierra 3500. Instead, I recommend using the Curt # C15400 which will have a comparable capacity and is also a 2" receiver. I really like Curt hitches because of the quality of the powder coating, which is important because it's going to fight off rust/corrosion much better than some of the other options.
  view full answer...
• Fifth Wheel Hitch With 30,000 lb Capacity for 2011 Ram 5500
  There is a fifth wheel hitch that gets close to the capacity you need, the Reese Low-Profile 5th Wheel Trailer Hitch # RP30054 which has a 30,000 lb capacity, though not one that can exceed that. This hitch is designed to be used on cab and chassis trucks like your 2011 Ram 5500 may be and installation will require welding or other modification to your truck's frame as this hitch does not use base rails. The Reese # RP30054 has a double jaw system which locks onto the king pin for a secure...
  view full answer...
• How Much Does the Curt Trailer Hitch Receiver item # C15400 Weigh?
  The Curt Trailer Hitch Receiver item # C15400 weighs 62 lbs. I saw you have a 2018 Coachmen Mirada Motorhome. This hitch will not fit the Ford F-53 chassis and there are no custom fit options. If this is the vehicle you are wanting to add a hitch to you will want to use the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver item # 41990-07. I have linked a couple of installation videos below along with the instructions.
  view full answer...
• Bolt On Universal Hitch for a 2021 GMC Sierra 3500HD w/ Wider Frame Rails
  I have a solution for you but with that wide of a frame you will not be able to use any of the custom fit hitches that are available for the varying models of GM 3500 trucks. The Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver item # 41990-16 is going to be your best option for attaching a hitch to your 2021 GMC Sierra 3500HD that has wider than standard frame rails. I have attached the instructions to show the options and steps that needed to be taken to bolt this hitch to your...
  view full answer...
  
• Fit and Compatibility of Deep Drop Trailer Hitch for a M35A2C
  I spoke to my contact at Curt and he informed me that the Curt hitch # C15317 center section measures 31-5/8 inches. The center to center mounting hole width with the flanges attached is 34-7/8 inches. He also informed me that the flanges on the # C15317 can be reversed if it helps to accommodate your M35A2C. This hitch will have a drop from mounting point to top of the receiver tube of 7-1/4 inches. Fitment cannot be confirmed since they have not performed a test fit on the vehicle. The...
  view full answer...
  
• Trailer Hitch Option For 2006 Itasca Suncruiser
  We have a hitch option for your 2006 Itasca Suncruiser, but the # C15400 is 32.94" wide overall and the bolt holes are 30.31" apart from each other. So what you will need is a universal weld-on hitch, which will fit so long as the frame on your motorhome measures no more than 44" outside to outside: - Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 44" Wide # C47CR
  view full answer...
• Class 5 Trailer Hitch Receiver Recommendation for a 1973 AMG M35A2
  To upgrade your 2" hitch receiver to a Class 5 I recommend installing the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 on your 1973 AMG M35A2. We don't have any other hitches with the same bolt pattern as the Curt # C14082 you currently have that are also rated as a Class 5. This Draw-Tite hitch has adjustable brackets and is rated for 16K towing/1.6K tongue weight so it is much more robust than the Curt on your truck.
  view full answer...
• Recommended Trailer Hitch for School Bus on 2005 Chevy Express 3500 Van Cutaway Chassis
  Your 2005 Chevy Express 3500 left the factory across the street from our facility as a Van cutaway chassis and was delivered to an upfitter that installed the bus body onto it and joined it with the cab portion of the van. Because there are many different upfitters, we have no way of knowing how the rear bumper is situated in regard to the frame, so it's very likely that the hitch that fits the passenger or cargo van models wouldn't be a fit, as their bumpers don't hang as low. We might...
  view full answer...
• Recommended Hitch for a 2018 Ram 3500 Cab and Chassis
  I would be happy to! It sounds like your 2018 Ram 3500 is the cab and chassis model. To add a hitch to it you will want the Curt Trailer Hitch Receiver item # C15800 for a 2-1/2" receiver or item # C15400 for a 2" receiver. Both of these hitches are custom fit for the cab and chassis model Ram 3500's and bolt to it with included hardware. These both fit single rear wheel and dually trucks that have a frame width of 34" wide measured from the outside of the frame rails. I have linked a...
  view full answer...
• Trailer Hitch Recommendation for a 2016 Chevrolet Silverado 3500 HD Truck
  I can help you find a hitch that will fit your 34 inch outside to outside measurement on your 2016 Chevy 3500 HD. It sounds like you have a Cab and Chassis style Chevy, because of the 34 inch wide outside to outside frame. I have listed the trailer hitches below that will fit your vehicle, but the Reese RP45302 is not one of them. I also included a link on this page to take you directly to the page of the 5 hitches that will fit your vehicle for your convenience. 2 inch receiver opening: Draw-Tite...
  view full answer...

Do you have a question about this Trailer Hitch?