Search: 41947   >  

I was able to obtain from Curt a chart showing key dimensions for their 3-Piece Trailer Hitch #C15511 (and other hitch models) that I linked for you. This shows that for hitch #C15511 the overall front-to-back length is just under 24-inches. The…

I spoke to Dexter and they said there is a bit of a process for installing the spindle nut properly. 1. You will need to thread on the inner nut, rotate the hub, then tighten the nut to 100 foot pounds. 2. Loosen the nut to remove the torque,…

The Curt Trailer Hitch Receiver #C15511 measures 33.26" wide, 5.562" between the two mounting holes closer to the rear of the truck, and 11.43" between the center and furthest forward mounting holes.

I have attached an image of the Draw-Tite Ultra Frame Trailer Hitch Receiver #41947 referenced in your question with a few dimensions labeled. The distance between mounting holes, from the left side mounting bracket to the right side mounting…

Many times the thickness of the grease seals #RG06-070 is not a factor. If this is a trailer hub there should be enough room for the seal to fit flush with seal flange.

The Draw-Tite Class IV Hitch, part #41943 will fit the rivet configuration you mentioned (see figure #3 in the instructions I have linked to). I checked with one of my contacts at Draw-Tite, who tells me that this hitch will work with the 34-1/4…

I was able to get the measurement of the distance from the bottom of the frame to the top of the receiver on the Draw-Tite #41943- which is roughly 8.75". Draw-Tite was not able to provide me with the other measurement you're asking…

For your 2007 Dodge RAM 3500 HD Flat Bed Crew Cab with dually chassis there is not a B&W trailer hitch receiver available. Instead, I recommend you use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"…

The modern day equivalent of a 20.5 x 8-10 tire is going to be a 205/65-10. The dimensions are as close as you can get to the old size. We have several tires and tire and wheel combos in this size with various bolt patterns (if a wheel is needed).…

This is not an uncommon situation for your generation of Chevy Silverado. If you remove the cover on the power distribution box, look for a row of larger fuses on the left side of the box (if facing the motor from the front of the truck). If there…

I took a look at the owners manual for your 2023 Chevrolet Equinox. While there is nothing mentioned about the Daytime Running lights under the dingy towing section, there was information on how to turn them off under the Daytime Running Lights…

Yes, I have the installation manual for the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW, part #FA92-00-0800. I will include it with a weblink to our Weight Distribution Hitch Help and Video page…