How to Find Replacement Hubs for 1966 Apache Eagle Tent Camper
Updated 03/21/2023 | Published 03/20/2023
Products Featured in This Question
Question:
Hello. I have a 1966 Apache Eagle Tent Camper and has 4 on 4, 8 Wheels. In your experience, can you tell me if you have a replacement Wheel hub that will fit... without having to remove the old hub and measure the axle first? Thanks
asked by: Matthew M
Expert Reply:
Based on past information and that bolt pattern you most likely have 2,000 lb axles on your 1966 Apache Eagle Tent Camper. Unfortunately, there are two possible bearing configurations for hubs that fit. There is no way to know which you need without removing the hub to identify the bearings.
You may be able to find a part number stamped in the bearing, it would either be # L44643 or # L44649. If you can't find a part number, you will need to measure the inner diameter of the bearings or measure the spindle where the bearings ride. This will require a digital caliper like the # PTW80157.
The # L44643 has an ID of 1" and the # L44649 has an ID of 1.063". Based on what you find you can use one of the following:
-Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings # AKIHUB-440-2-2K
-Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings # AKIHUB-440-2-1K
I have attached a diagram below showing where part numbers are typically found as well as where to measure for your reference.
(click to enlarge)
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Shop: Vehicle Lights
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM30010
- Video: The Low-Down on the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range B
- Search Results: trailer lights
- Video: Review of the Optronics LED Trailer License Plate Light
- Video: Optronics Mini LED Trailer License Plate Light w/ Chrome Housing Feature Review
- Video: Complete Breakdown of the Miro-Flex LED Clearance or Side Marker Light w/ Chrome Bezel
- Video: Feature Breakdown: GloLight LED Trailer Tail Light
- Video: A Closer Look at the 921 Incandescent Light Bulb
- Q&A: Can Bulbs of Trailer Lighting Be Swapped to Convert To LED
- Shop: 194 Incandescent Light Bulb - Wedge Base - 4 Watt - Soft White - Qty 2
- Shop: GloLight LED Transit Tail Light - Brake, Turn, Tail - Surface Mount - Round - Red
- Shop: 921 Incandescent Light Bulb - Wedge Base - 18 Watt - Soft White - Qty 2
- Shop: GloLight Halo LED Trailer Light - Brake, Tail, Turn - Submersible - Oval - Red and Clear
- Shop: Putco PURE Premium 1157 LED Bulbs - 360 Degree - Red - 2 Pack
- Q&A: Difference Between Tire Sizes 4.80-12 and 5.30-12
- Search Results: trailer tongue jack
- Q&A: We Keep Blowing Out Tires. Should We Go Up From A 6 Ply To An 8 Ply?
- Q&A: Replacement Trailer Brake Turn Light for 1969 Apache Mesa Trailer
- Q&A: Is There a Bolt On Bracket For Safety Chains on a Trailer
- Q&A: Torque Specs for Install Bolts of Coupler Part # CTA-280
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
on Trailer Hubs and Drums
