Parts Needed For Installing Stainless Steel Disc Brakes On a 6,000LB Single Axle Trailer
Updated 01/23/2023 | Published 01/21/2023
Products Featured in This Question
Question:
I have a 6000 pound trailer 6 lug 5.5 inch lug to lug 91 inch axle outside hub to outsize hub I need to change to: Stainless disc brakes Galvanized axle Sealed hubs vortex or similar Actuator Hoses What do you suggest?
asked by: Alan K
Expert Reply:
Starting with the axles, we do not carry any galvanized axles in the dimension you are needing. You may consider taking the axles you already have and having them galvanized at a local facility as long as they are not otherwise damaged. While we do not carry sealed hubs like the Vortex we do have a Stainless Hub # KH42655S. You will need a Inner Bearing # 25580, Outer Bearing # 15123 and Grease Seal # GS-2250DL(2.25" ID) or # GS-2125DL(2.125" ID) for each hub. The Bearing Buddy # BB2441SS will provide 2 stainless steel caps which will allow you to press grease into the hubs to ensure they are filled.
The Kodiak Disc Brake Kit # K2R526S will provide you with a set of stainless steel rotors, calipers and mounting brackets with hardware for your 6,000LB axle. For this you will need either a Surge # DM62VR type actuator or a Electric Over Hydraulic # HS481-8067 type actuator. From the actuator you will need a brake line kit. We have one with a 15' Main Line # HS496-151 or 25' Main Line # HS496-251 for a single axle trailer.
Product Page this Question was Asked From
Kodiak Trailer Hub for 5,200-lb to 6,000-lb Axles - 6 on 5-1/2 - Stainless Steel
- Trailer Hubs and Drums
- Idler Hub
- Standard
- 25580 / 15123
- Marine Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Kodiak
more information >
Continue Researching
- Video: The Low-Down on the Dust Cap for Kodiak Disc Brake Kit
- Search Results: ez lube
- Search Results: zerk
- Shop: Dust Cap for Kodiak Disc Brake Kit
- Shop: Kodiak Trailer Hub for 5,200-lb to 6,000-lb Axles - 6 on 5-1/2 - Stainless Steel
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 2.45" Outer Diameter
- Search Results: trailer hubs and drums
- Search Results: dust cap
- Search Results: zerk fitting
- Search Results: ez lube zerk
- Q&A: Bearings and Grease Seals Needed for Kodiak Stainless Steel 6-on-5-1/2 Trailer Hub KH42655S
- Q&A: Replacement Stainless Steel Kodiak Trailer Brake Kit For 6,000LB Axle With 6 On 5-1/2 Bolt Pattern
- Shop: Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Stainless Steel - 5,200 lbs to 6,000 lbs
- Q&A: Should Bearing Buddies Buddies be Used on EZ Lube Trailer Axles
- Shop: Dexter's E-Z Lube Grease Cap and Plug Kit - 2.45" Outer Diameter
- Shop: Dexter Grease Zerks for E-Z Lube and Nev-R-Lube Axles - Thread-In - 1/4" OD x 5/16" Long
- Shop: Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Comparing Demco and Titan Disc Brake Actuators with Electric Lockouts
- Search Results: brake actuator
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Hubs and Drums
