Is Ground Clearance Lost with Install of Curt Hitch C15307 on 2020 Chevy Silverado 1500

Question

Question:

How much ground clearance do i lose installing this hitch under my OEM hitch?

asked by: Adam L

0

Expert Reply:

Since the Curt hitch part # C15307 fits right under the OEM hitch of your 2020 Chevy Silverado 1500 you'd lose about 3 inches of ground clearance. Since the truck sits up pretty high though you most likely would not have any issues though.

expert reply by: Jameson C

0

Answer 1

The Curt hitch part #C31088 that you referenced is actually a front hitch so it would not interfere at all with the factory hitch on your 2019 GMC Sierra 1500. We do have the Curt hitch part #C15307 which is a confirmed fit for your truck with a…

view full answer...

Answer 2

I can tell you exactly which trailer hitches fit your new body style of 2019 Chevy Silverado 1500, and there are two options depending on if you have the factory hitch or not, though neither of the hitches are a Class IV square tube hitch. The only…

view full answer...

Answer 3

Hey Austin, for your 2024 Chevy Silverado 1500 with a factory hitch we really only have a hitch that fits underneath your current hitch with the Curt #C15307 that you referenced. Is there anything wrong with your factory hitch?

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #C15307 is installed with the factory receiver in place. This receiver will actually bolt to your factory receiver so it is required to leave the factory receiver installed to use the Curt receiver.

view full answer...

Answer 5

The best hitch for your 2023 Chevy Silverado 1500 is the etrailer Hitch item #e79AR. This hitch is custom fit and bolts to your Silverado with included hardware. It is made specifically for the Silverado 1500's that do not come from the factory…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Is Ground Clearance Lost with Install of Curt Hitch C15307 on 2020 Chevy Silverado 1500

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching