Does The Factory Receiver Hitch Need Removed With Curt Receiver C15307 On 2020 Silverado 1500?

Question

Question:

Does the factory hitch need to be removed when installing the c15307 hitch? 2020 chevy silverado 1500 with factory hitch.

asked by: Jeff L

0

Expert Reply:

The Curt Trailer Hitch Receiver # C15307 is installed with the factory receiver in place. This receiver will actually bolt to your factory receiver so it is required to leave the factory receiver installed to use the Curt receiver.

expert reply by: Bud M

0

Answer 1

There are actually a couple of Curt trailer hitches that fit your 2024 GMC Sierra 1500, with the right one depending on if you have a factory hitch or not. I'll list the options below: - WITH Factory Hitch: Curt Trailer Hitch Receiver #C15307 -…

view full answer...

Answer 2

The only trailer hitch option for a 2020 GMC Sierra 1500 that will work with the factory hitch is the Curt Trailer Hitch Receiver part #C15307 which actually installs under the factory hitch. This will result in a much lower connection point. The…

view full answer...

Answer 3

To flat tow a 2024 Chevy Silverado 1500 you will need the following parts: Tow Bar and Safety Chains - Roadmaster Sterling Tow Bar item #RM-576 and item #RM-674 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item #RM86MR…

view full answer...

Answer 4

According to the owner's manual, 4x4 Silverado 1500 models with a 2 speed transfer case (Neutral and 4WD LOW) are the only Silverado models that can be flat towed. The owner's manual doesn't directly address why the negative battery…

view full answer...

Answer 5

The general reason a battery needs to be disconnected for flat towing is because there are certain functions that need to be disabled to prevent your vehicle's battery from draining. You wouldn't want to get to your destination and unhook and…

view full answer...

Answer 6

The Roadmaster 80" Coiled Safety Cables - Double Hook part #RM-653 has a capacity of 10,000 lbs as a pair. They are designed for flat towing a vehicle. If you need more weight capacity in a cable, I recommend Demco coiled safety cables part…

view full answer...

Answer 7

The Curt hitch part #C31088 that you referenced is actually a front hitch so it would not interfere at all with the factory hitch on your 2019 GMC Sierra 1500. We do have the Curt hitch part #C15307 which is a confirmed fit for your truck with a…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver #C15307 will only install with the factory receiver in place on your 2020 Chevrolet Silverado 1500. With you having a factory receiver this is the only option currently available as the factory receiver is integrated…

view full answer...

Answer 9

Unfortunately, there is no way for me to know what size hitch ball the coupler on a Keystone Passport Ultra Lite Grand Touring 2920BH accepts. It will more than likely be either a 2" hitch ball or 2-5/16" hitch ball. The only way to know…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Does The Factory Receiver Hitch Need Removed With Curt Receiver C15307 On 2020 Silverado 1500?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching